Dr. Raul Duarte Salgueiral Gomes Campilho has a PhD in Mechanical Engineering (2009) and a Habilitation in Mechanical Engineering, both from the Faculty of Engineering of the University of Porto (Portugal). He is an auxiliary professor of the Mechanical Engineering department of ISEP – School of Engineering, Polytechnic University of Porto (Portugal), where he teaches several courses of the Bachelor and Master degree in Mechanical Engineering. Since 2023 he is the vice-director of CIDEM – Centre for Research & Development in Mechanical Engineering. He develops his research activities in ISEP and INEGI – Institute of Science and Innovation in Mechanical and Industrial Engineering, which is a Research and Technology Organization (RTO), and is affiliated to the LAETA – Associate Laboratory of Energy, Transports and Aerospace. His research mainly focuses on adhesive joints; structural adhesives; design of bonded joints; experimental testing; Finite Element Method; Extended Finite Element Method; Meshless Methods; Cohesive Zone Models; composite materials; numerical modelling of composite materials; micromechanics; macromechanics; design of mechanical structures; flexible production; automation; robotics; and actuator systems. He was the principal investigator of 1 national R&D project and participated/participates as a researcher in 6 national R&D projects, all funded through competitive calls. He also participated in 1 R&D project in collaboration with the Portuguese industry (funded through competitive calls). He is/was the (co)supervisor of 6 PhD (1 concluded and 5 ongoing) and 258 MSc thesis. His publication record contains 340 articles & reviews published in Web of Science-indexed journals and 154 book chapters. He also coedited 3 books and was the (co)author of over 400 communications that were presented in international conferences and 18 communications presented in national conferences.

• Adhesive Joints
• Structural Adhesives
• Design of Bonded Joints
• Experimental Testing
• Finite Element Method
• Extended Finite Element Method
• Meshless Methods
• Cohesive Zone Models
• Composite Materials
• Numerical Modelling of Composite Materials
• Micromechanics
• Macromechanics
• Design of Mechanical Structures
• Flexible Production
• Automation
• Robotics and Actuator Systems

• LAR Gomes; RDSG Campilho; JPA Valente; MJR Queirós; K. Madani. "Impact loading analysis of double-lap composite bonded joints". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2023.103547.
• Chaudhari, Rakesh; Rehman, Inam Ur; Khanna, Sakshum; Patel, Vivek K.; Vora, Jay; Prakash, Chander; Campilho, Raul Duarte Salgueiral Gomes; et al. "A parametric study with experimental investigations of expanded graphite on performance measurement of EDM process of Ni55.8Ti SMA". Alexandria Engineering Journal 87 (2024): 164-174.  http://dx.doi.org/10.1016/j.aej.2023.12.013 .
• Campilho, Raul. "Advances in testing and numerical modeling of composite materials". PriMera Scientific Engineering 4 (2024): 1-2.
• Raul DSG Campilho. "Advances in the Experimentation and Numerical Modeling of Material Joining Processes". Materials (2023): https://doi.org/10.3390/ma17010130 
• Francisca R. Nogueira; André FV Pedroso; Francisco JG Silva; Raul DSG Campilho; Rita CM Sales-Contini; Naiara PV Sebbe; Rafaela CB Casais. "A Comparative Study on the Wear Mechanisms of Uncoated and TiAlTaN-Coated Tools Used in Machining AMPCO® Alloy". Coatings (2023): https://doi.org/10.3390/coatings14010004 .
• Raul DSG Campilho. "Design of Adhesive Bonded Joints".  Processes (2023): https://doi.org/10.3390/pr11123369.
• Luís D. C. Ramalho; Isidro J. Sánchez-Arce; Diogo C. Gonçalves; Raul DSG Campilho; Jorge Belinha. "Free Vibration Parametric Study of a Double Lap Joint Using the Radial Point Interpolation Method". International Journal of Applied Mechanics (2023). https://doi.org/10.1142/S1758825123500886.
• Ricardo BP Barros; Raul DSG Campilho; Isidro J Sánchez-Arce; João MM Dionísio; Kouider Madani. "Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023): https://doi.org/10.1177/14644207221140296
• Carvalho, DFT; Campilho, RDSG; Vargas, AS; Moreira, RDF; Madani, K.. "Parametric cohesive zone analysis of bi-adhesive single-step joints". SN Applied Sciences 5 12 (2023): http://dx.doi.org/10.1007/s42452-023-05586-3
• Raul DSG Campilho; Francisco JG Silva. "Industrial Process Improvement by Automation and Robotics". Machines (2023): https://doi.org/10.3390/machines11111011
• Campilho, Raul. "Academia Materials Science: Advances and innovation in all topics of materials science". Academia Materials Science (2023): http://dx.doi.org/10.20935/acadmatsci6148
• Eduardo Eiras; Francisco JG Silva; Raul DSG Campilho; Rita CM Sales-Contini; André FV Pedroso; Naiara PV Sebbe. "A Novel Fully Automatic Concept to Produce First Subset of Bowden Cables, Improving Productivity, Flexibility, and Safety". Machines (2023). https://doi.org/10.3390/machines11110992.
• PAR Ferreira; RDSG Campilho; IJ Sánchez Arce; DC Gonçalves; C. Prakash. "Static strength prediction of curved composite joints under internal pressure". The Journal of Adhesion (2023): https://doi.org/10.1080/00218464.2023.2174434
• Ramalho, Luís DC; Sánchez-Arce, Isidro J.; Gonçalves, Diogo C.; Campilho, Raul DSG; Belinha, Jorge. "Strength prediction of a single lap joint under impact using meshless methods". Composites Part C: Open Access 12 (2023): 100384. http://dx.doi.org/10.1016/j.jcomc.2023.100384
• Gonçalves, DC; Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Simulation of mode II fracture propagation in adhesive joints using a meshless technique". Composites Part C: Open Access 12 (2023): 100385. http://dx.doi.org/10.1016/j.jcomc.2023.100385
• Houari, A.; Madani, K.; El Ajrami, M.; Belhouari, M.; Campilho, RDSG. "Analysis of the substrate nature on the strength of a single-lap joint". Journal of the Brazilian Society of Mechanical Sciences and Engineering 45 9 (2023): http://dx.doi.org/10.1007/s40430-023-04397-2
• Vitor HP Lopes; Raul DSG Campilho; Paulo JRO Nóvoa; Ricardo JB Rocha; Isidro J. Sánchez-Arce. "Experimental and cohesive zone modeling study on composite joining by co-curing and adhesive bonding for sheet molding compound or carbon-fiber prepreg laminates". Journal of Adhesion Science and Technology (2023): https://doi.org/10.1080/01694243.2022.2081446
• Rahmouni, Faouzi; Elajrami, Mohamed; Madani, Kouider; Campilho, Raul DSG. "Isogeometric analysis of stress concentrations and failure strength in composite plates with circular holes using RHT-splines". European Journal of Mechanics - A/Solids 99 (2023): 104904. http://dx.doi.org/10.1016/j.euromechsol.2022.104904
• JPM Lopes; RDSG Campilho; MA Bellali; MC Baghdadi. "Design Concepts for Peel-Dominant Adhesive Joints in Aeronautic Applications". Journal of Research Updates in Polymer Science (2023): https://doi.org/10.6000/1929-5995.2023.12.03
• Pedro Pereira; Raul Campilho; Andy Pinto. "An Inverse Kinematics Approach for the Analysis and Active Control of a Four-UPR Motion-Compensated Platform for UAV–ASV Cooperation". Machines (2023). https://doi.org/10.3390/machines11040478
• Manuel Gaspar; Francisco JG Silva; Arnaldo G. Pinto; Raul DSG Campilho. "2D and 3D Wires Formability for Car Seats: A Novel Full-Automatic Equipment Concept towards High Productivity and Flexibility". Machines (2023): https://doi.org/10.3390/machines11030410
• AFV Pedroso; HRV Sousa; NPV Sebbe; FJG Silva; RDSG Campilho; RCM Sales-Contini; AMP Jesus. "A Comprehensive Review on the Conventional and Non-Conventional Machining and Tool-Wear Mechanisms of INCONEL®". Metals (2023): https://doi.org/10.3390/met13030585
• Luís D. C. Ramalho; Isidro J. Sánchez-Arce; Diogo C. Gonçalves; Raul DSG Campilho; Jorge Belinha. "Free vibration parametric study of a single lap joint using the Radial Point Interpolation Method". Composite Structures (2023): https://doi.org/10.1016/j.compstruct.2023.116668
• AFL Macedo; RDSG Campilho; FJG Silva; MA Bellali. "Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023). https://doi.org/10.1177/09544089221088262
• MVPA Silva; LMC Peres; RDSG Campilho; RJB Rocha; FJG Silva. "Cohesive zone parametric analysis in the tensile impact strength of tubular adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2023). https://doi.org/10.1177/09544089221088261
• Gonçalves, DC; Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "A meshless crack propagation algorithm extended to mixed-mode loading of adhesive joints". Composite Structures 305 (2023): 116502. http://dx.doi.org/10.1016/j.compstruct.2022.116502
• Belhouari, M.; Benkheira, A.; Madani, K.; Campilho, RDSG; Gong, XL. "Effect of Temperature on the Energy Release Rate Variation in Repaired Laminate Composites". Journal of Failure Analysis and Prevention 23 1 (2023): 420-435. http://dx.doi.org/10.1007/s11668-023-01594-y 
• IJ Sánchez-Arce; DC Gonçalves; LDC Ramalho; RDSG Campilho; J. Belinha. "The Ogden model and the natural neighboring radial point interpolation method for hyperelastic analyses". Journal of the Brazilian Society of Mechanical Sciences and Engineering (2023). https://doi.org/10.1007/s40430-022-04001-z
• Gonçalves, DC; Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "A meshless analysis of mode I fracture propagation in adhesive joints with experimental validation". Engineering Analysis with Boundary Elements 146 (2023): 119-131. http://dx.doi.org/10.1016/j.enganabound.2022.10.010
• Lopes, JPM; Campilho, RDSG; Rocha, RJB. "Numerical evaluation of the adhesive effect on the peel strength of aluminum T-joints". Procedia Structural Integrity 47 (2023): 48-55. http://dx.doi.org/10.1016/j.prostr.2023.06.040
• Gomes, LAR; Campilho, RDSG; Valente, JPA. "Parametric analysis of double-lap composite adhesive joints under impact loads". Procedia Structural Integrity 47 (2023): 94-101. http://dx.doi.org/10.1016/j.prostr.2023.06.044
• Silva, JESM; Campilho, RDSG; Sánchez-Arce, IJ; Moreira, RDF. "Effect of adhesive type on the tensile behavior of tubular scarf adhesive joints". Procedia Structural Integrity 47 (2023): 70-79. http://dx.doi.org/10.1016/j.prostr.2023.06.042
• Nóbrega, JBS; Campilho, RDSG; Sánchez-Arce, IJ; Nóvoa, PJRO. "Numerical estimation of the peel strength of adhesive joints via the floating roller peel test". Procedia Structural Integrity 47 (2023): 408-416. http://dx.doi.org/10.1016/j.prostr.2023.07.084
• Gonçalves LS; Campilho, Raul; Prakash C. "Development of quality assurance system in the automotive industry". Advances in Science and Technology 132 (2023): 43-52.
• Pereira PJPD; Campilho, Raul; Pereira JPGT; Moreira LCF; Prakash C. "Design and validation of gripper solution using soft robotics principles". Advances in Science and Technology 132 (2023): 109-119.
• Barros, RBP; Campilho, RDSG; Sánchez-Arce, IJ; Dionísio, JMM; Madani, K.. "Experimental analysis on the mixed-mode fracture behavior of structural adhesives". Procedia Structural Integrity 51 (2023): 17-23. http://dx.doi.org/10.1016/j.prostr.2023.10.061
• Ferreira, PAR; Campilho, RDSG; Sánchez-Arce, IJ; Gonçalves, DC. "Geometry effect on the static strength of curved composite bonded joints". Procedia Structural Integrity 51 (2023): 115-121. http://dx.doi.org/10.1016/j.prostr.2023.10.076
• Pedroso, AFV; Campilho, RDSG; Rocha, RJB; Gomes, MA. "Low Velocity Impact Evaluation of Self-Healing Sandwich Structures". Journal of Composites and Biodegradable Polymers 10 (2022): 43-51. http://dx.doi.org/10.12974/2311-8717.2022.10.04
• Luís FR Neves; Raul DSG Campilho; Isidro J. Sánchez-Arce; Kouder Madani; Chander Prakash. "Numerical Modeling and Validation of Mixed-Mode Fracture Tests to Adhesive Joints Using J-Integral Concepts". Processes (2022): https://doi.org/10.3390/pr10122730
• Vitor Santos; Vitor FC Sousa; Francisco JG Silva; João CO Matias; Rúben D. Costa; Arnaldo G. Pinto; Raul DSG Campilho. "Applying the SMED Methodology to Tire Calibration Procedures". Systems (2022): https://doi.org/10.3390/systems10060239
• IJ Sánchez-Arce; LDC Ramalho; DC Gonçalves; RDSG Campilho; J. Belinha. "Hyperelasticity and the radial point interpolation method via the Ogden model". Engineering Analysis with Boundary Elements (2022): https://doi.org/10.1016/j.enganabound.2022.08.035
• Djebbar, S. Ch.; Madani, K.; El Ajrami, M.; Houari, A.; Kaddouri, N.; Mokhtari, M.; Feaugas, X.; Campilho, RDSG. "Substrate geometry effect on the strength of repaired plates: Combined XFEM and CZM approach". International Journal of Adhesion and Adhesives 119 (2022): 103252. http://dx.doi.org/10.1016/j.ijadhadh.2022.103252
• Gonçalves, DC; Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Fracture propagation based on meshless method and energy release rate criterion extended to the Double Cantilever Beam adhesive joint test". Theoretical and Applied Fracture Mechanics 122 (2022): 103577. http://dx.doi.org/10.1016/j.tafmec.2022.103577
• Barros, Ricardo BP; Campilho, Raul DSG; Sánchez-Arce, Isidro J; Dionísio, João MM; Madani, Kouider. "Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 237 12 (2022): 2537-2550. http://dx.doi.org/10.1177/14644207221140296
• Raul Duarte Salgueiral Gomes Campilho; Kouider Madani; Chander Prakash. "Advanced Characterization of Adhesive Joints and Adhesives". Materials (2022). https://doi.org/10.3390/ma15207347
• Saurabh Shah; Anand Joshi; Kamlesh Chauhan; Ankit Oza; Chander Prakash; Raul Duarte Salgueiral Gomes Campilho; Sandeep Kumar. "Feasibility Analysis of Machining Cobalt-Chromium Alloy (Stellite-6) Using TiN Coated Binary Inserts". Materials (2022). https://doi.org/10.3390/ma15207294
• Vijay Patel; Unnati Joshi; Anand Joshi; Ankit D. Oza; Chander Prakash; Emanoil Linul; Raul Duarte Salgueiral Gomes Campilho; Sandeep Kumar; Kuldeep Kumar Saxena. "Strength Evaluation of Functionalized MWCNT-Reinforced Polymer Nanocomposites Synthesized Using a 3D Mixing Approach". Materials (2022): https://doi.org/10.3390/ma15207263
• Jorge Manuel Moreira Vieira; Raul Duarte Salgueiral Gomes Campilho; Francisco José Gomes da Silva; Isidro de Jesús Sánchez-Arce. "Development of a rotation and lifting system for pallet rotary tables". The International Journal of Advanced Manufacturing Technology (2022). https://doi.org/10.1007/s00170-022-09881-y
• Ramalho, LDC; Sánchez-Arce, Isidro J.; Gonçalves, Diogo C.; Belinha, J.; Campilho, RDSG. "Numerical analysis of the dynamic behaviour of adhesive joints: A review". International Journal of Adhesion and Adhesives 118 (2022): 103219. http://dx.doi.org/10.1016/j.ijadhadh.2022.103219
• José LTA Pereira; Raul DSG Campilho; Francisco JG Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi. "Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive Industry". Processes (2022): https://doi.org/10.3390/pr10101953
• Rúben Costa; Vitor Sousa; Francisco JG Silva; Raul Campilho; José C. Sá; Arnaldo Pinto; João Pereira. "Increasing the Sustainability of Manufacturing Processes in Plastic Injection: Recovering Out-Of-Service Robots to Eliminate Manual Assembly Operations". Sustainability (2022). https://doi.org/10.3390/su141912300
• Rúben Costa; Vitor FC Sousa; Francisco JG Silva; Raul Campilho; Arnaldo G. Pinto; Luís P. Ferreira; Rui Soares. "A Novel Robotic Manipulator Concept for Managing the Winding and Extraction of Yarn Coils". Machines (2022): https://doi.org/10.3390/machines10100857
• André FG Barbosa; Raul DSG Campilho; Francisco JG Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi. "Design of a Spiral Double-Cutting Machine for an Automotive Bowden Cable Assembly Line". Machines (2022): https://doi.org/10.3390/machines10090811
• Anusha Peyyala; M. Naga Swapna Sri; VV Venu Madhav; Ch. Sri Chaitanya; VV Spandana; KULDEEP KUMAR SAXENA; Dalael Saad Abdul-Zahra; et al. "Dynamics of MHD Convection of Walters B Viscoelastic Fluid through an Accelerating Permeable Surface Using the Soret–Dufour Mechanism". Applied Sciences (2022): https://www.mdpi.com/2076-3417/12/19/9431
• Rashi Tyagi; Amitava Mandal; Alok Kumar Das; Ashutosh Tripathi; Dr Chander Prakash; Campilho RDSG; KULDEEP KUMAR SAXENA. "Electrical Discharge Coating a Potential Surface Engineering Technique: A State of the Art". Processes (2022): https://www.mdpi.com/2227-9717/10/10/1971
• Vieira, Jorge Manuel Moreira; Campilho, Raul Duarte Salgueiral Gomes; da Silva, Francisco José Gomes; de Jesús Sánchez-Arce, Isidro. "Development of a rotation and lifting system for pallet rotary tables". The International Journal of Advanced Manufacturing Technology 122 11-12 (2022): 4321-4339. http://dx.doi.org/10.1007/s00170-022-09881-y
• R Penne; FJG Silva; RDSG Campilho; G Santos; HRV Sousa; LP Ferreira; JC Sá; MT Pereira. "A new approach to increase the environmental sustainability of the discharging process in the over-injection of conduits for bowden cables using automation". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022). https://doi.org/10.1177/09544062221087547
• JAP Pereira; RDSG Campilho; FJG Silva; IJ Sánchez-Arce. "Robotized cell design for part assembly in the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022): https://doi.org/10.1177/09544062221082860
• Lopes, Vitor HP; Campilho, Raul DSG; Nóvoa, Paulo JRO; Rocha, Ricardo JB; Sánchez-Arce, Isidro J.. "Experimental and cohesive zone modeling study on composite joining by co-curing and adhesive bonding for sheet molding compound or carbon-fiber prepreg laminates". Journal of Adhesion Science and Technology 37 9 (2022): 1593-1613. http://dx.doi.org/10.1080/01694243.2022.2081446
• Rahmouni, Faouzi; Elajrami, Mohamed; Madani, Kouider; Campilho, RDSG. "Isogeometric analysis based on non-uniform rational B-splines technology of stress and failure strength in inter-ply hybrid laminated composite". Journal of Composite Materials 56 18 (2022): 2921-2932. http://dx.doi.org/10.1177/00219983221105313
• FJG Silva; Vitor FC Sousa; Campilho RDSG; Ricardo Alexandre. "Wear Behavior of Coated Tools When Milling S32101 Duplex Stainless Steel". Materials Proceedings (2022). https://www.mdpi.com/2673-4605/8/1/45
• Vitor Fernando Crespim Sousa; Francisco José Gomes da Silva; Raul Duarte Salgueiral Gomes Campilho; Arnaldo Guedes Pinto; Luís Pinto Ferreira; Nuno Martins. "Developing a Novel Fully Automated Concept to Produce Bowden Cables for the Automotive Industry". Machines 10 5 (2022): 290-290. https://doi.org/10.3390/machines10050290
• Gonçalves, DC; Lopes, JDF; Campilho, RDSG; Belinha, J.. "Topology optimization using a natural neighbor meshless method combined with a bi-directional evolutionary algorithm". Mathematics and Computers in Simulation 194 (2022): 308-328. http://dx.doi.org/10.1016/j.matcom.2021.11.021
• Ramalho, LDC; Dionísio, JMM; Sánchez-Arce, IJ; Campilho, RDSG; Belinha, J.. "Analysis of stress singularity in adhesive joints using meshless methods". Engineering Analysis with Boundary Elements 137 (2022): 29-40. http://dx.doi.org/10.1016/j.enganabound.2022.01.012
• Pedro Nuno de Almeida Arrojado da Silva Pereira; Raul Duarte Salgueiral Gomes Campilho; Andry Maykol Gomes Pinto. "Application of a Design for Excellence Methodology for a Wireless Charger Housing in Underwater Environments". Machines 10 4 (2022): 232-232. https://doi.org/10.3390/machines10040232
• Macedo, AFL; Campilho, RDSG; Silva, FJG; Bellali, MA. "Numerical analysis of the mixed-mode fracture of bonded joints depending on the adhesive thickness". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237 1 (2022): 14-25. http://dx.doi.org/10.1177/09544089221088262
• Nunes, DM; Campilho, RDSG; Silva, FJG. "Design of a transfer system for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): 095440892210800. http://dx.doi.org/10.1177/09544089221080042
• Vieira, Diogo; Silva, Francisco JG; Campilho, Raul DSG; Sousa, Vitor FC; Ferreira, Luís P.; Sá, José C.; Brito, Marlene. "Automating Equipment towards Industry 4.0: A New Concept for a Transfer System of Lengthy and Low-Stiffness Products for Automobiles". Journal of Testing and Evaluation 50 5 (2022): 20210721. http://dx.doi.org/10.1520/jte20210721
• da Costa, JDC; Campilho, RDSG; Silva, FJG; Sánchez-Arce, IJ. "Design of Buried Equipment for the Collection of Urban Solid Waste". Journal of Testing and Evaluation 50 5 (2022): 20210672. http://dx.doi.org/10.1520/jte20210672
• Gonçalves, Diogo Costa; Lopes, Joel; Campilho, Raul; Belinha, Jorge. "An evolutionary structural optimization algorithm for the analysis of light automobile parts using a meshless technique". Engineering Computations (2022): http://dx.doi.org/10.1108/ec-05-2021-0271
• Gonçalves, DC; Lopes, JDF; Campilho, RDSG; Belinha, J.. "The Radial Point Interpolation Method combined with a bi-directional structural topology optimization algorithm". Engineering with Computers (2022): http://dx.doi.org/10.1007/s00366-021-01556-8
• Gonçalves, Diogo C.; Sánchez-Arce, Isidro J.; Ramalho, Luís DC; Campilho, Raul DSG; Belinha, Jorge. "Introductory application of a natural neighbour meshless elastic formulation to double-lap adhesive joints". Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 2 (2022): http://dx.doi.org/10.1007/s40430-021-03355-0
• Gonçalves, DC; Lopes, JDF; Campilho, RDSG; Belinha, J.. "Topology optimization of light structures using the natural neighbor radial point interpolation method". Meccanica 57 3 (2022): 659-676. http://dx.doi.org/10.1007/s11012-021-01459-4
• Ramalho, LDC; Dionísio, JMM; Sánchez-Arce, IJ; Campilho, RDSG; Belinha, J.. "Meshless analysis of the stress singularity in composite adhesive joints". Composite Structures 280 (2022): 114910. http://dx.doi.org/10.1016/j.compstruct.2021.114910
• Tojal, MC; Silva, FJG; Campilho, RDSG; Pinto, AMG; Ferreira, LP. "Case-based product development of a high-pressure die casting injection subset using design science research". FME Transactions (2022).
• Lopes, JPM; Campilho, RGSG; Rocha, RJB; Silva, FJG. "Geometrical parameter study of adhesively-bonded T-joints by cohesive models". Procedia Structural Integrity 37 (2022): 714-721. http://dx.doi.org/10.1016/j.prostr.2022.02.001
• Pereira, JPO; Campilho, RGSG; Nóvoa, PJRO; Silva, FJG; Gonçalves, DC. "Adherend effect on the peel strength of a brittle adhesive". Procedia Structural Integrity 37 (2022): 722-729. http://dx.doi.org/10.1016/j.prostr.2022.02.002
• Pereira, TFC; Campilho, RDSG; Rocha, RJB; Sánchez-Arce, IJ. "Cohesive zone parameter influence on the impact strength of composite adhesive joints". Procedia Structural Integrity 41 (2022): 14-23. http://dx.doi.org/10.1016/j.prostr.2022.05.004
• Carvalho, PMD; Campilho, RDSG; Sánchez-Arce, IJ; Rocha, RJB; Soares, ARF. "Adhesive-bonded T-joint cohesive zone analysis using dual-adhesives". Procedia Structural Integrity 41 (2022): 24-35. http://dx.doi.org/10.1016/j.prostr.2022.05.005
• Oliveira, TJS; Campilho, RDSG; Cardoso, MG; Sánchez-Arce, IJ. "Cohesive zone analysis of torsional tubular joints with an epoxy adhesive". Procedia Structural Integrity 41 (2022): 72-81. http://dx.doi.org/10.1016/j.prostr.2022.05.009
• Soares, ARF; Campilho, RDSG; Chaves, FJP; Sánchez-Arce, IJ; Fecheira, JMFS; Silva, FJG; Carvalho, PMD. "Design and validation of mixed-mode device for fracture toughness analysis of adhesive joints". Procedia Structural Integrity 41 (2022): 48-59. http://dx.doi.org/10.1016/j.prostr.2022.05.007
• Pinheiro, AES; Campilho, RDSG; Moreira, RDF; Sánchez-Arce, IJ. "Validation of theoretical models for the strength prediction of tubular adhesive joints". Procedia Structural Integrity 41 (2022): 60-71. http://dx.doi.org/10.1016/j.prostr.2022.05.008
• Silva, JESM; Campilho, RDSG; Sánchez-Arce, IJ; Moreira, RDF. "Numerical evaluation of tensile-loaded tubular scarf adhesive joints". Procedia Structural Integrity 41 (2022): 36-47. http://dx.doi.org/10.1016/j.prostr.2022.05.006
• Silva FJG; Sousa VFC; Campilho, Raul; Alexandre R. "Wear behavior of coated tools when milling S32101 duplex stainless steel". Materials Proceedings 8 (2022): 45.
• Medjdoub SM; Madani K; Rezgani L; Mallarino S; Touzain S; Campilho, Raul. "Numerical analysis of the combined aging and fillet effect of the adhesive on the numerical behavior of a single lap joint of type Aluminum/Aluminum". Structural Engineering and Mechanics 83 (2022): 693-707.
• Kaddouri N; Madani K; Djebbar SCH; Belhouari M; Campilho, Raul. "Impact of bonding defect on the tensile response of a composite patch-repaired structure: Effect of the defect position and size". Structural Engineering and Mechanics 84 (2022): 799-811.
• Almeida, Fátima de; Sousa, Vitor FC; Silva, Francisco JG; Campilho, Raúl DSG; Ferreira, Luís P.. "Development of a Novel Design Strategy for Moving Mechanisms Used in Multi-Material Plastic Injection Molds". Applied Sciences 11 24 (2021): 11805. http://dx.doi.org/10.3390/app112411805
• Vieira, Alexandre LN; Campilho, Raul DSG; Silva, Francisco JG; Ferreira, Luís P.. "Increasing the Environmental Sustainability of an Over-Injection Line for the Automotive Component Industry". Sustainability 13 22 (2021): 12692. http://dx.doi.org/10.3390/su132212692
• Dionísio, JMM; Ramalho, LDC; Sánchez-Arce, IJ; Campilho, RDSG; Belinha, J.. "Fracture mechanics approach to stress singularities in composite adhesive joints". Composite Structures 276 (2021): 114507. http://dx.doi.org/10.1016/j.compstruct.2021.114507
• Dionísio, JMM; Ramalho, LDC; Sánchez-Arce, IJ; Campilho, RDSG; Belinha, J.. "Fracture mechanics approach to stress singularity in adhesive joints". International Journal of Fracture 232 1 (2021): 77-91. http://dx.doi.org/10.1007/s10704-021-00594-z
• Peres, LMC; Arnaud, MFTD; Silva, AFMV; Campilho, RDSG; Machado, JJM; Marques, EAS; dos Reis, MQ; Da Silva, LFM. "Geometry and adhesive optimization of single-lap adhesive joints under impact". The Journal of Adhesion (2021): 1-27. http://dx.doi.org/10.1080/00218464.2021.1994404
• Oliveira, TJS; Campilho, RDSG; Cardoso, M G. "Three-dimensional numerical analysis of tubular adhesive joints under torsional loads". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012082. http://dx.doi.org/10.1088/1757-899x/1193/1/012082
• Sánchez, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J. "Modelling adhesively-bonded T-joints by a meshless method". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012083. http://dx.doi.org/10.1088/1757-899x/1193/1/012083
• Resende, RFP; Resende, BFP; Sanchez Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Elasto-plastic adhesive joint design approach by a radial point interpolation meshless method". The Journal of Adhesion (2021): 1-27. http://dx.doi.org/10.1080/00218464.2021.1977633
• Silva, FJG; Soares, MR; Ferreira, LP; Alves, AC; Brito, M.; Campilho, RDSG; Sousa, VFC. "A Novel Automated System for the Handling of Car Seat Wires on Plastic Over-Injection Molding Machines". Machines 9 8 (2021): 141. http://dx.doi.org/10.3390/machines9080141
• Ramalho, Luís DC; Sánchez-Arce, Isidro J.; Campilho, Raul DSG; Belinha, Jorge. "Strength prediction of composite single lap joints using the critical longitudinal strain criterion and a meshless method". International Journal of Adhesion and Adhesives 108 (2021): 102884. http://dx.doi.org/10.1016/j.ijadhadh.2021.102884
• Oliveira, Pedro N.; Fonseca, Elza MM; Campilho, Raul DSG; Pilot, Paulo AG. "Analytical Equations Applied to the Study of Steel Profiles under Fire According to Different Nominal Temperature-Time Curves". Mathematical and Computational Applications 26 2 (2021): 48. http://dx.doi.org/10.3390/mca26020048 
• Bellali, Mohammed Amine; Serier, Boualem; Mokhtari, Mohamed; Campilho, Raul DSG; Lebon, Frederic; Fekirini, Hamida. "XFEM and CZM modeling to predict the repair damage by composite patch of aircraft structures: Debonding parameters". Composite Structures 266 (2021): 113805. http://dx.doi.org/10.1016/j.compstruct.2021.113805
• Silva, André; Silva, Francisco JG; Campilho, Raul DSG; Neves, Pedro MPF. "A new approach to temperature control in the extrusion process of composite tire products". Journal of Manufacturing Processes 65 (2021): 80-96. http://dx.doi.org/10.1016/j.jmapro.2021.03.022
• Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Meshless analysis of substrate stiffness and its effect on metallic double-L joint strength and stress distributions". Engineering Analysis with Boundary Elements 125 (2021): 190-200. http://dx.doi.org/10.1016/j.enganabound.2021.01.019
• Ramalho, Luís; DSG Campilho, Raul; Belinha, Jorge; De Castro, Paulo MST. "Parametric Study of Fatigue Crack Growth in a Finite Plate". U.Porto Journal of Engineering 7 2 (2021): 22-30. http://dx.doi.org/10.24840/2183-6493_007.002_0004
• Ramalho, Luís DC; Sánchez-Arce, Isidro J.; Campilho, Raul DSG; Belinha, Jorge. "Strength prediction of composite single lap joints using the radial point interpolation method". Composite Structures 259 (2021): 113228. http://dx.doi.org/10.1016/j.compstruct.2020.113228
• Santos, PMM; Campilho, RDSG; Silva, FJG. "A new concept of full-automated equipment for the manufacture of shirt collars and cuffs". Robotics and Computer-Integrated Manufacturing 67 (2021): 102023. http://dx.doi.org/10.1016/j.rcim.2020.102023
• Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Material non-linearity in the numerical analysis of SLJ bonded with ductile adhesives: A meshless approach". International Journal of Adhesion and Adhesives 104 (2021): 102716. http://dx.doi.org/10.1016/j.ijadhadh.2020.102716
• Silva, J.; Silva, FJG; Campilho, RDSG; Sá, JC; Ferreira, LP. "A model for productivity improvement on machining of components for stamping dies". International Journal of Industrial Engineering and Management 12 (2021): 85-101.
• Faria, NMS; Campilho, Raul; Silva, FJG; Ferreira, LP. "Concept and design of automated moving device for healthcare equipment". FME Transactions 49 3 (2021): 598-607. http://dx.doi.org/10.5937/fme2103598f
• Pinto, Gustavo; Silva, FJG; Baptista, A.; Campilho, Raul; Viana, F.. "Investigations on the oxidation of Zn-coated steel cables". FME Transactions 49 3 (2021): 587-597. http://dx.doi.org/10.5937/fme2103587p
• Sousa, VFC; Silva, FJG; Ferreira, LP; Campilho, RDSG; Pereira, T.; Braga, E.. "Improving the design of nozzles used in zamak high-pressure die-casting process". FME Transactions 49 4 (2021): 1005-1013. http://dx.doi.org/10.5937/fme2104005s
• Vieira, ALN; Campilho, RDSG; Silva, FJG; Faria, NMS; Ferreira, LP. "Design of a thermoplastic micro over injection machine for the automotive component industry". Procedia Manufacturing 55 (2021): 56-63. http://dx.doi.org/10.1016/j.promfg.2021.10.009
• Antunes, RPRO; Campilho, RDSG; Silva, FJG; Vieira, ALN. "Numerical validation of cohesive laws for adhesive layers with varying thickness in bonded structures". Procedia Manufacturing 55 (2021): 213-220. http://dx.doi.org/10.1016/j.promfg.2021.10.030
• Rosas, MFMO; Campilho, RDSG; Moreira, RDF. "Numerical analysis of geometrical modification combinations of the tensile strength of tubular adhesive joints". Procedia Structural Integrity 33 (2021): 115-125. http://dx.doi.org/10.1016/j.prostr.2021.10.016
• Resende, RFP; Resende, BFP; Sánchez-Arce, IJ; Gonçalves, DC; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Meshless approach to material plasticity in adhesive joints". Procedia Structural Integrity 33 (2021): 126-137. http://dx.doi.org/10.1016/j.prostr.2021.10.017
• Silva, AFMV; Peres, LMC; Campilho, RDSG; Rocha, RJB. "Impact loading analysis of tubular adhesive joints". Procedia Structural Integrity 33 (2021): 138-148. http://dx.doi.org/10.1016/j.prostr.2021.10.018
• Sánchez-Arce, IJ; Gonçalves, DC; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Meshless and hyper-elastic implementation to analyze flexible adhesives". Procedia Structural Integrity 33 (2021): 149-158. http://dx.doi.org/10.1016/j.prostr.2021.10.019 
• Brito, RFN; Campilho, RDSG; Moreira, RDF; Sánchez-Arce, IJ; Silva, FJG. "Composite stepped-lap adhesive joint analysis by cohesive zone modeling". Procedia Structural Integrity 33 (2021): 665-672. http://dx.doi.org/10.1016/j.prostr.2021.10.074 
• Faria, RVF; Campilho, RDSG; Gonçalves, PJA; Rocha, RJB; Sánchez-Arce, IJ; Silva, FJG. "Numerical analysis by XFEM of hybrid T-peel joints". Procedia Structural Integrity 33 (2021): 673-684. http://dx.doi.org/10.1016/j.prostr.2021.10.075
• Oliveira, Pedro N.; Fonseca, Elza MM; Campilho, Raul DSG. "Easy Trends to Analyze Structural Profiles: Lumped Capacitance Vs Simplified Equation". International Journal of Safety and Security Engineering 10 5 (2020): 625-629. http://dx.doi.org/10.18280/ijsse.100506
• Correia, JMC; Campilho, RDSG; Rocha, RJB; Liu, Y.; Ramalho, LDC. "Parametric study of composite curved adhesive joints". The International Journal of Advanced Manufacturing Technology 111 9-10 (2020): 2957-2970. http://dx.doi.org/10.1007/s00170-020-06314-6
• Faria, RVF; Campilho, RDSG; Gonçalves, PJA; Rocha, RJB. "Advanced numerical methods for the strength prediction of hybrid adhesively bonded T-peel joints". The Journal of Adhesion (2020): 1-26. http://dx.doi.org/10.1080/00218464.2020.1823840
• Brito, RFN; Campilho, RDSG; Moreira, RDF; Sánchez-Arce, IJ. "Material and adhesive effect in adhesively-bonded composite stepped-lap joints". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234 13 (2020): 1967-1979. http://dx.doi.org/10.1177/0954410020932014
• Ramalho, LDC; Belinha, J.; Campilho, RDSG. "A New Crack Propagation Algorithm Combined with the Finite Element Method". Journal of Mechanics 36 4 (2020): 405-422. http://dx.doi.org/10.1017/jmech.2020.1
• Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Single lap joint strength prediction using the radial point interpolation method and the critical longitudinal strain criterion". Engineering Analysis with Boundary Elements 113 (2020): 268-276. http://dx.doi.org/10.1016/j.enganabound.2020.01.010
• Loureiro, FJCFB; Campilho, RDSG; Rocha, RJB. "J-integral analysis of the mixed-mode fracture behavior of composite bonded joints". The Journal of Adhesion 96 (2020): 321-344. https://doi.org/10.1080/00218464.2019.1667776
• JJG Oliveira; RDSG Campilho; FJG Silva; EAS Marques; JJM Machado; LFM da Silva. "Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints". The Journal of Adhesion 96 (2020): 300-320. https://doi.org/10.1080/00218464.2019.1681269
• Valente, JPA; Campilho, RDSG; Marques, EAS; Machado, JJM; da Silva, Lucas FM. "Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modeling". International Journal of Adhesion and Adhesives 97 (2020): 102492. http://dx.doi.org/10.1016/j.ijadhadh.2019.102492
• CL Ferreira; RDSG Campilho; RDF Moreira. "Experimental and numerical analysis of dual-adhesive stepped-lap aluminum joints". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): https://doi.org/10.1177/0954408920905747
• JJM Machado; PDP Nunes; EAS Marques; RDSG Campilho; Lucas FM da Silva. "Numerical study of mode I fracture toughness of carbon-fiber-reinforced plastic under an impact load". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2020): 146442071987139-146442071987139. https://doi.org/10.1177/1464420719871390
• Ramalho, LDC; Campilho, RDSG; Belinha, J.; da Silva, LFM. "Static strength prediction of adhesive joints: A review". International Journal of Adhesion and Adhesives 96 (2020): 102451. http://dx.doi.org/10.1016/j.ijadhadh.2019.102451
• Ramalho, LDC; Belinha, J.; Campilho, RDSG. "A novel robust remeshing finite element technique for fracture propagation". International Journal of Computational Methods (2020).
• Loureiro, FJCFB; Campilho, RDSG; Rocha, RJB. "Mixed-mode fracture toughness of a structural adhesive by the single-leg bending test". Procedia Structural Integrity 25 (2020): 63-70. http://dx.doi.org/10.1016/j.prostr.2020.04.010
• Machado, RMD; Campilho, RDSG; Rocha, RJB. "Numerical modeling and experimental validation of step bonded joints". Procedia Structural Integrity 25 (2020): 71-78. http://dx.doi.org/10.1016/j.prostr.2020.04.011
• Ribeiro, JPSMB; Campilho, Raul DSG; Rocha, RJB. "Mixed-mode evaluation of ductile adhesive joints by the single-leg bending test". Procedia Structural Integrity 28 (2020): 1106-1115. http://dx.doi.org/10.1016/j.prostr.2020.11.125
• Ferreira, CL; Campilho, RDSG; Moreira, RDF. "Bonded structures improvement by the dual adhesive technique". Procedia Structural Integrity 28 (2020): 1116-1124. http://dx.doi.org/10.1016/j.prostr.2020.11.126 
• Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Analyzing single-lap joints bonded with a brittle adhesive by an elastic meshless method". Procedia Structural Integrity 28 (2020): 1084-1093. http://dx.doi.org/10.1016/j.prostr.2020.11.123
• Moreira, FJP; Campilho, RDSG; Cardoso, MG; Silva, FJG. "Evaluation of T-joints in aluminum structures under different geometries". Procedia Manufacturing 51 (2020): 848-855. http://dx.doi.org/10.1016/j.promfg.2020.10.119
• Ferreira, JAM; Campilho, RDSG; Cardoso, MG; Silva, FJG. "Numerical simulation of adhesively-bonded T-stiffeners by cohesive zone models". Procedia Manufacturing 51 (2020): 870-877. http://dx.doi.org/10.1016/j.promfg.2020.10.122
• Ramalho, LDC; Sánchez-Arce, IJ; Campilho, RDSG; Belinha, JAOP; Silva, FJG. "Strength prediction and stress analysis of adhesively bonded composite joints using meshless methods". Procedia Manufacturing 51 (2020): 904-911. http://dx.doi.org/10.1016/j.promfg.2020.10.127
• Cardoso, MG; Pinto, JEC; Campilho, RDSG; Nóvoa, PJRO; Silva, FJG; Ramalho, LDC. "A new structural two-component epoxy adhesive: Strength and fracture characterization". Procedia Manufacturing 51 (2020): 771-778. http://dx.doi.org/10.1016/j.promfg.2020.10.108
• Silva, André FA; Silva, FJG; Campilho, RDSG; Neves, Pedro MPF. "3D finite element analysis and optimization of cap ply production system in the tire industry". Procedia Manufacturing 51 (2020): 763-770. http://dx.doi.org/10.1016/j.promfg.2020.10.107
• Baptista, A.; Silva, FJG; Campilho, RDSG; Ferreira, S.; Pinto, G.. "Applying DMADV on the industrialization of updated components in the automotive sector: a case study". Procedia Manufacturing 51 (2020): 1332-1339. http://dx.doi.org/10.1016/j.promfg.2020.10.186
• Ferreira, C.; Silva, FJG; Campilho, RDSG; Fecheira, JS. "Study of the kinematics of a high-course steering system". Procedia Manufacturing 51 (2020): 164-170. http://dx.doi.org/10.1016/j.promfg.2020.10.024
• Figueiredo, D.; Silva, FJG; Campilho, RDSG; Silva, A.; Pimentel, C.; Matias, JCO. "A new concept of automated manufacturing process for wire rope terminals". Procedia Manufacturing 51 (2020): 431-437. http://dx.doi.org/10.1016/j.promfg.2020.10.061
• Freitas, F.; Silva, FJG; Campilho, RDSG; Pimentel, C.; Godina, R.. "Development of a suitable project management approach for projects with parallel planning and execution". Procedia Manufacturing 51 (2020): 1544-1550. http://dx.doi.org/10.1016/j.promfg.2020.10.215
• Pinto, G.; Silva, FJG; Baptista, A.; Fecheira, JS; Campilho, RDSG; Viana, F.. "Studying the ZnO formation in coated steel wire ropes for the automotive industry". Procedia Manufacturing 51 (2020): 912-919. http://dx.doi.org/10.1016/j.promfg.2020.10.128
• Silva, FJG; Swertvaegher, G.; Campilho, RDSG; Ferreira, LP; Sa, JC. "Robotized solution for handling complex automotive parts in inspection and packing". Procedia Manufacturing 51 (2020): 156-163. http://dx.doi.org/10.1016/j.promfg.2020.10.023
• Rodrigues, H.; Silva, FJG; Morgado, LG; Sá, JC; Ferreira, LP; Campilho, RDSG. "A novel computer application for scrap reporting and data management in the manufacturing of components for the automotive industry". Procedia Manufacturing 51 (2020): 1319-1326. http://dx.doi.org/10.1016/j.promfg.2020.10.184
• Martins, L.; Silva, FJG; Pimentel, C.; Casais, RB; Campilho, RDSG. "Improving Preventive Maintenance Management in an Energy Solutions Company". Procedia Manufacturing 51 (2020): 1551-1558. http://dx.doi.org/10.1016/j.promfg.2020.10.216
• Vieira, AM; Silva, FJG; Campilho, RDSG; Ferreira, LP; Sá, JC; Pereira, T.. "SMED methodology applied to the deep drawing process in the automotive industry". Procedia Manufacturing 51 (2020): 1416-1422. http://dx.doi.org/10.1016/j.promfg.2020.10.197
• Martins, Nuno; Silva, FJG; Campilho, RDSG; Ferreira, LP. "A novel concept of Bowden cables flexible and fully-automated manufacturing process improving quality and productivity". Procedia Manufacturing 51 (2020): 438-445. http://dx.doi.org/10.1016/j.promfg.2020.10.062
• Lopes, R.; Silva, FJG; Godina, R.; Campilho, R.; Dieguez, T.; Ferreira, LP; Baptista, A.. "Reducing scrap and improving an air conditioning pipe production line". Procedia Manufacturing 51 (2020): 1410-1415. http://dx.doi.org/10.1016/j.promfg.2020.10.196
• Back.; Silva, FJG; Campilho, RDSG; Pereira, T.. "Guidelines for Machine Tool Sensing and Smart Manufacturing Integration". Procedia Manufacturing 51 (2020): 251-257. http://dx.doi.org/10.1016/j.promfg.2020.10.036
• Ferreira, S.; Martins, L.; Silva, FJG; Casais, RB; Campilho, RDSG; Sá, JC. "A novel approach to improve maintenance operations". Procedia Manufacturing 51 (2020): 1531-1537. http://dx.doi.org/10.1016/j.promfg.2020.10.213
• Sousa, V.; Silva, FJG; Fecheira, JS; Campilho, RDSG; Vandermeulen, V.. "A Novel Modular Design of an Equipment to Produce “T”-Profiles by Laser Welding". Procedia Manufacturing 51 (2020): 446-453. http://dx.doi.org/10.1016/j.promfg.2020.10.063
• Dieguez, Teresa; Corcetti, L.; Silva, FJG; Campilho, RDSG; Ferreira, LP. "How can technology on the automotive industry save the future?". Procedia Manufacturing 51 (2020): 1763-1772. http://dx.doi.org/10.1016/j.promfg.2020.10.245
• FJP Moreira; RDSG Campilho. "Extended Finite Element Modeling of Adhesive Joints Under Peel Loads". Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology 30 (2019): 13-20. https://doi.org/10.35219/awet.2019.02
• IJ Sánchez-Arce; LDC Ramalho; RDSG Campilho; J. Belinha. "Evaluation of an elastic meshless formulation to adhesive joints' strength prediction against established methods". Journal of Adhesion Science and Technology (2019): https://doi.org/10.1080/01694243.2019.1702829
• Ramalho, LDC; Belinha, J.; Campilho, RDSG. "The numerical simulation of crack propagation using radial point interpolation meshless methods". Engineering Analysis with Boundary Elements 109 (2019): 187-198. http://dx.doi.org/10.1016/j.enganabound.2019.10.001
• Machado, JJM; Hayashi, A.; Sekigushi, Y.; Campilho, RDSG; Marques, EAS; Sato, C.; da Silva, Lucas FM. "Dynamic behavior in mode I fracture toughness of CFRP as a function of temperature". Theoretical and Applied Fracture Mechanics 103 (2019): 102257. http://dx.doi.org/10.1016/j.tafmec.2019.102257
• Ramalho, LDC; Campilho, RDSG; Belinha, J.. "Predicting single-lap joint strength using the natural neighbor radial point interpolation method". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 9 (2019): 362. http://dx.doi.org/10.1007/s40430-019-1862-0
• Valente, JPA; Campilho, RDSG; Marques, EAS; Machado, JJM; da Silva, LFM. "Adhesive joint analysis under tensile impact loads by cohesive zone modeling". Composite Structures 222 (2019): 110894. http://dx.doi.org/10.1016/j.compstruct.2019.110894
• Moreira, FJP; Campilho, RDSG. "Use of the XFEM for the design of adhesively-bonded T-joints". Frattura ed Integrità Strutturale 13 49 (2019): 435-449. http://dx.doi.org/10.3221/igf-esis.49.42
• Viana, Filipe; Campilho, RDSG; Rocha, Ricardo; Silva, Daniel; Araújo, Rui; Ribeiro, José. "Fracture modeling of adhesively-bonded joints by an inverse method". Fracture and Structural Integrity 13 48 (2019): 286-303. http://dx.doi.org/10.3221/igf-esis.48.29
• Ribeiro, João; Campilho, RDSG; Rocha, Ricardo; Leal, Alberto; Viana, Filipe. "Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints". Fracture and Structural Integrity 13 48 (2019): 332-347. http://dx.doi.org/10.3221/igf-esis.48.32
• Ferreira, LRF; Campilho, RDSG; Rocha, RJB; Barbosa, DR. "Geometrical and material optimization of tensile loaded tubular adhesive joints using cohesive zone modeling". The Journal of Adhesion 95 5-7 (2019): 425-449. http://dx.doi.org/10.1080/00218464.2018.1551136
• Machado, RMD; Campilho, RDSG; Rocha, RJB. "Extended finite element modeling of aluminum stepped-adhesive joints". The Journal of Adhesion 95 5-7 (2019): 450-473. http://dx.doi.org/10.1080/00218464.2018.1548966
• Luís DC Ramalho; Jorge Belinha; Raul DSG Campilho. "Fracture propagation using the radial point interpolation method". Fatigue & Fracture of Engineering Materials & Structures 43 (2019): 77-91. https://doi.org/10.1111/ffe.13046
• Barbosa, DR; Campilho, RDSG; Rocha, RJB; Ferreira, LRF. "Experimental and numerical assessment of tensile loaded tubular adhesive joints". Journal of Materials: Design and Application – Part L 233 (2019): 452-464.
• Ramesh, V.; Campilho, RDSG; Silva, FJG; Rocha, RJB; Kumar, S.. "Evaluation of the extended finite element method for the analysis of bonded joints with different geometries". Procedia Manufacturing 38 (2019): 264-271. http://dx.doi.org/10.1016/j.promfg.2020.01.035
• Ferreira, LRF; Campilho, RDSG; Barbosa, DR; Rocha, RJB; Silva, FJG. "Static strength improvement of tubular aluminium adhesive joints by the outer chamfering technique". Procedia Manufacturing 38 (2019): 629-636. http://dx.doi.org/10.1016/j.promfg.2020.01.081
• Kumar, S.; Campilho, RDSG; Silva, FJG. "Rethinking modular jigs' design regarding the optimization of machining times". Procedia Manufacturing 38 (2019): 876-883. http://dx.doi.org/10.1016/j.promfg.2020.01.169
• Sousa, JCM de; Campilho, RDSG; Silva, FJG; Santos, PMM dos. "Process improvement in the metallic mesh cutting operation associated to tire manufacturing". Procedia Manufacturing 38 (2019): 924-931. http://dx.doi.org/10.1016/j.promfg.2020.01.175
• Leal, AJS; Campilho, RDSG; Silva, FJG; Silva, DFO; Moreira, FJP. "Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive". Procedia Manufacturing 38 (2019): 940-947. http://dx.doi.org/10.1016/j.promfg.2020.01.177
• Oliveira, HDBCL de; Campilho, RDSG; Silva, FJG. "Design of a modular solution for an autonomous vehicle for cargo transport and handling". Procedia Manufacturing 38 (2019): 991-999. http://dx.doi.org/10.1016/j.promfg.2020.01.183
• Chandrasekaran, R.; Campilho, RDSG; Silva, FJG. "Reduction of scrap percentage of cast parts by optimizing the process parameters". Procedia Manufacturing 38 (2019): 1050-1057. http://dx.doi.org/10.1016/j.promfg.2020.01.191
• Silva, JOS; Campilho, RDSG; Rocha, RJB; Silva, FJG. "Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints". Procedia Manufacturing 38 (2019): 1189-1196. http://dx.doi.org/10.1016/j.promfg.2020.01.209
• Alves, DL; Campilho, RDSG; Moreira, RDF; Silva, FJG; Cardoso, MG. "Effect of material hybridization on the strength of scarf adhesive joints". Procedia Manufacturing 38 (2019): 1244-1251. http://dx.doi.org/10.1016/j.promfg.2020.01.216
• Nunes, FAA; Campilho, RDSG; Cardoso, MG; Silva, FJG. "Fracture envelope estimation of a structural adhesive by dedicated fracture tests". Procedia Manufacturing 38 (2019): 1252-1259. http://dx.doi.org/10.1016/j.promfg.2020.01.217
• Teixeira, JMD; Campilho, RDSG; Silva, FJG; Moreira, FJP; Silva, D.F.O. "Comparative evaluation of different fracture tests for the tensile fracture toughness of a ductile adhesive". Procedia Manufacturing 38 (2019): 1268- 1275. http://dx.doi.org/10.1016/j.promfg.2020.01.221
• Veiga, NFM; Campilho, RDSG; Silva, FJG da; Santos, PMM; Lopes, PV. "Design of automated equipment for the assembly of automotive parts". Procedia Manufacturing 38 (2019): 1316-1323. http://dx.doi.org/10.1016/j.promfg.2020.01.158
• Pinto, B.; Silva, FJG; Costa, T.; Campilho, RDSG; Pereira, MT. "A Strategic Model to take the First Step Towards Industry 4.0 in SMEs". Procedia Manufacturing 38 (2019): 637-645. http://dx.doi.org/10.1016/j.promfg.2020.01.082
• Costa, C.; Silva, FJG; Campilho, RDSG; Neves, P.; Godina, R.; Ferreira, S.. "Influence of textile cord tension in cap ply production". Procedia Manufacturing 38 (2019): 1766-1774. http://dx.doi.org/10.1016/j.promfg.2020.01.090
• Selvaraj, D.K.; Silva, FJG; Campilho, RDSG; Baptista, A.; Pinto, GFL. "Influence of the natural additive on natural fiber reinforced thermoplastic composite". Procedia Manufacturing 38 (2019): 1121-1129. http://dx.doi.org/10.1016/j.promfg.2020.01.200
• Pinto, HA; Silva, FJG; Martinho, RP; Campilho, RDSG; Pinto, AG. "Improvement and validation of Zamak die casting moulds". Procedia Manufacturing 38 (2019): 1547-1557. http://dx.doi.org/10.1016/j.promfg.2020.01.131
• Amaral, I.; Silva, FJG; Pinto, GFL; Campilho, RDSG; Gouveia, RM. "Improving the Cut Surface Quality by Optimizing Parameters in the Fiber Laser Cutting Process". Procedia Manufacturing 38 (2019): 1111-1120. http://dx.doi.org/10.1016/j.promfg.2020.01.199
• Fernandes, A. Baptista; Silva, FJG; Campilho, RDSG; Pinto, GFL. "Intralogistics and industry 4.0: designing a novel shuttle with picking system". Procedia Manufacturing 38 (2019): 1801-1832. http://dx.doi.org/10.1016/j.promfg.2020.01.078
• Pinto, GFL; Silva, FJG; Campilho, RDSG; Couples, RB; Fernandes, AJ; Baptista, A.. "Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools". Procedia Manufacturing 38 (2019): 1582-1591. http://dx.doi.org/10.1016/j.promfg.2020.01.127
• Dias, P.; Silva, FJG; Campilho, RDSG; Ferreira, LP; Santos, T.. "Analysis and Improvement of an Assembly Line in the Automotive Industry". Procedia Manufacturing 38 (2019): 1444-1452. http://dx.doi.org/10.1016/j.promfg.2020.01.143
• Santos, PR; Silva, FJG; Campilho, RDSG; Pinto, GFL; Baptista, A.. "A novel concept of a conduit transport system". Procedia Manufacturing 38 (2019): 848-857. http://dx.doi.org/10.1016/j.promfg.2020.01.166
• Ribeiro, R.; Silva, FJG; Pinto, AG; Campilho, RDSG; Pinto, HA. "Designing a Novel System for the Introduction of Lubricant in Control Cables for the Automotive Industry". Procedia Manufacturing 38 (2019): 715-725. http://dx.doi.org/10.1016/j.promfg.2020.01.096
• Tellini, T.; Silva, FJG; Pereira, T.; Morgado, L.; Campilho, RDSG; Ferreira, LP. "Improving In-Plant Logistics Flow by Physical and Digital Pathways". Procedia Manufacturing 38 (2019): 965-974. http://dx.doi.org/10.1016/j.promfg.2020.01.180
• Santos, T.; Silva, FJG; Ramos, SF; Campilho, RDSG; Ferreira, LP. "Asset Priority Setting for Maintenance Management in the Food Industry". Procedia Manufacturing 38 (2019): 1623-1633. http://dx.doi.org/10.1016/j.promfg.2020.01.122
• Lopes, PV; Silva, FJG; Campilho, RDSG; Almeida, F. de. "Designing a novel and greener truck asphalt container". Procedia Manufacturing 38 (2019): 324-332. http://dx.doi.org/10.1016/j.promfg.2020.01.042
• Monteiro, J.; Silva, FJG; Ramos, SF; Campilho, RDSG; Fonseca, AM. "Eco-Design and Sustainability in Packaging: A Survey". Procedia Manufacturing 38 (2019): 1741-1749. http://dx.doi.org/10.1016/j.promfg.2020.01.097
• Machado, DMSRB; Campilho, RDSG; Cardoso, MG. "Impact modeling of single-lap bonded joints by cohesive zone models". Procedia Manufacturing 41 (2019): 34-41. http://dx.doi.org/10.1016/j.promfg.2019.07.026
• Eusébio, SML; Campilho, RDSG. "Modelling of tubular adhesively-bonded joints by the Extended Finite Element Method". Procedia Manufacturing 41 (2019): 484-491. http://dx.doi.org/10.1016/j.promfg.2019.10.001
• Magalhães, AJA; Silva, FJG; Campilho, RDSG. "A novel concept of bent wires sorting operation between workstations in the production of automotive parts". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 1 (2018): 25. http://dx.doi.org/10.1007/s40430-018-1522-9
• Silva, DFO; Campilho, RDSG; da Silva, FJG; Carvalho, UTF. "Application a direct/cohesive zone method for the evaluation of scarf adhesive joints". Applied Adhesion Science 6 1 (2018): 13. https://doi.org/10.1186/s40563-018-0115-2
• Barbosa, NGC; Campilho, RDSG; da Silva, FJG; Moreira, RDF. "Comparison of different adhesively-bonded joint types for mechanical structures". Applied Adhesion Science 6 1 (2018): 15. https://doi.org/10.1186/s40563-018-0116-1
• Silva, JOS; Campilho, RDSG; Rocha, RJB. "Crack growth analysis of adhesively-bonded stepped joints in aluminum structures". Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 11 (2018): 540. https://doi.org/10.1007/s40430-018-1466-0
• Leal, AJS; Campilho, RDSG. "Numerical evaluation of the ENF and 4ENF tests for the shear toughness estimation of adhesive joints". Composite Structures 202 (2018): 333-343. http://dx.doi.org/10.1016/j.compstruct.2018.01.107
• Nunes, FAA; Campilho, RDSG. "Mixed-mode fracture analysis of adhesively-bonded joints using the ATDCB test specimen". International Journal of Adhesion and Adhesives 85 (2018): 58-68. http://dx.doi.org/10.1016/j.ijadhadh.2018.05.019
• da Silva, FJG; Araújo, W.; Campilho, RDSG; Baptista, A.; Pinto, G.. "How to Become a Manufacturing Cell Fully-Automated Without Robots: Case-Study in the Automotive Components Industry". Advances in Robotics & Mechanical Engineering 1 1 (2018): 3-9. http://dx.doi.org/10.32474/arme.2018.01.000102
• Costa, M.; Viana, G.; Créac'hcadec, R.; da Silva, LFM; Campilho, RDSG. "A cohesive zone element for mode I modeling of adhesives degraded by humidity and fatigue". International Journal of Fatigue 112 (2018): 173-182. http://dx.doi.org/10.1016/j.ijfatigue.2018.03.014
• Alves, DL; Campilho, RDSG; Moreira, RDF; Silva, FJG; da Silva, LFM. "Experimental and numerical analysis of hybrid adhesively-bonded scarf joints". International Journal of Adhesion and Adhesives 83 (2018): 87-95. http://dx.doi.org/10.1016/j.ijadhadh.2018.05.011
• Figueiredo, JCP; Campilho, RDSG; Marques, EAS; Machado, JJM; da Silva, LFM. "Adhesive thickness influence on the shear fracture toughness measurements of adhesive joints". International Journal of Adhesion and Adhesives 83 (2018): 15-23. http://dx.doi.org/10.1016/j.ijadhadh.2018.02.015
• Silva, FJG; Baptista, A.; Pinto, G.; Campilho, RDSG; Ribeiro, MCS. "Characterization of hybrid pultruded structural products based on preforms". Composites Part B: Engineering 140 (2018): 16-26. http://dx.doi.org/10.1016/j.compositesb.2017.12.019
• de Oliveira, BMA; Campilho, RDSG; Silva, FJG; Rocha, RJB. "Comparison between the ENF and 4ENF fracture characterization tests to evaluate GIIC of bonded aluminum joints". The Journal of Adhesion 94 11 (2018): 910-931. http://dx.doi.org/10.1080/00218464.2017.1387056
• Fernandes, RL; Campilho, RDSG. "Accuracy of cohesive laws with different shapes for the shear behavior prediction of bonded joints". The Journal of Adhesion 95 4 (2018): 325-347. http://dx.doi.org/10.1080/00218464.2018.1438895
• Teixeira, JMD; Campilho, RDSG; da Silva, FJG. "Numerical assessment of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for the GIC determination of adhesive layers". The Journal of Adhesion 94 11 (2018): 951-973. http://dx.doi.org/10.1080/00218464.2017.1383905
• Namesake, JTS; Campilho, RDSG. "Strength estimation of hybrid single-L bonded joints by the eXtended Finite Element Method". Composite Structures 183 (2018): 397-406. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018776731&partnerID=MN8TOARS
• Silva, DFO; Campilho, RDSG; Silva, FJG; Carvalho, UTF. "Experimental and numerical analysis of scarf aluminum adhesive joints". Procedia Manufacturing 17 (2018): 705-712. http://dx.doi.org/10.1016/j.promfg.2018.10.120
• Almeida, FJS de; Campilho, RDSG; Silva, FJG; Marques, GP. "Development of a numerical methodology for strength prediction of weld-bonded joints". Procedia Manufacturing 17 (2018): 713-720. http://dx.doi.org/10.1016/j.promfg.2018.10.121
• Barbosa, NGC; Campilho, RDSG; Silva, FJG da; Moreira, RDF. "Comparison of different adhesively-bonded joint configurations for mechanical structures". Procedia Manufacturing 17 (2018): 721-728. http://dx.doi.org/10.1016/j.promfg.2018.10.122
• Santos, PMM; Campilho, RDSG; Silva, FJG. "Design of a novel equipment for automated clothing manufacturing". Procedia Manufacturing 17 (2018): 766-773. http://dx.doi.org/10.1016/j.promfg.2018.10.127
• Barbosa, RCN; Campilho, RDSG; Silva, FJG. "Injection mold design for a plastic component with blowing agent". Procedia Manufacturing 17 (2018): 774-782. http://dx.doi.org/10.1016/j.promfg.2018.10.128
• Santos, RFL; Silva, FJG; Gouveia, RM; Campilho, RDSG; Pereira, MT; Ferreira, LP. "The Improvement of an APEX Machine involved in the Tire Manufacturing Process". Procedia Manufacturing 17 (2018): 571-578. http://dx.doi.org/10.1016/j.promfg.2018.10.098
• Silva, Gabriel B.; Silva, FJG; Campilho, RDSG; Gouveia, RM. "Designing a Novel Feeding System for CNC Turning Machines". Procedia Manufacturing 17 (2018): 1144-1153. http://dx.doi.org/10.1016/j.promfg.2018.10.020
• Silva, FJG; Campilho, RDSG; Gouveia, RM; Pinto, G.; Baptista, A.. "A Novel Approach to Optimize the Design of Parts for Additive Manufacturing". Procedia Manufacturing 17 (2018): 53-61. http://dx.doi.org/10.1016/j.promfg.2018.10.012
• Barbosa, DR; Campilho, RDSG; Rocha, RJB; Ferreira, LRF. "Cohesive zone analysis of tubular adhesively-bonded joints". Welding Equipment and Technology 29 (2018): 11-18.
• Santos, MAS; Campilho, RDSG. "Experimental and numerical analysis of the fracture envelope of composite adhesive joints". Materials Science and Technology 30 (2018): 131-137.
• Carvalho, UTF; Campilho, RDSG. "Validation of a direct method to predict the strength of adhesively bonded joints". Materials Science and Technology 30 (2018): 138-143.
• Silva, FJG; Amorim, E.; Baptista, A.; Pinto, G.; Campilho, RDSG; Castro, MRA. "Producing hybrid pultruded structural products based on preforms". Composites Part B: Engineering 116 (2017): 325-332. http://dx.doi.org/10.1016/j.compositesb.2016.10.070 
• Gálvez, P; Carbas, RJC; Campilho, RDSG; Abenojar, J; Martínez, MA; LFM, da Silva. "Fracture toughness in Mode I (GIC) for ductile adhesives". Journal of Physics: Conference Series 843 (2017): 012008. http://dx.doi.org/10.1088/1742-6596/843/1/012008
• Araújo, LMB; Silva, FJG; Campilho, RDSG; Matos, JA. "A novel dynamic holding system for thin metal plate shearing machines". Robotics and Computer-Integrated Manufacturing 44 (2017): 242-252. http://dx.doi.org/10.1016/j.rcim.2016.06.006
• Costa, MJR; Gouveia, RM; Silva, FJG; Campilho, RDSG. "How to solve quality problems by advanced fully-automated manufacturing systems". The International Journal of Advanced Manufacturing Technology 94 9-12 (2017): 3041-3063. http://dx.doi.org/10.1007/s00170-017-0158-8
• Costa, RJS; Silva, FJG; Campilho, RDSG. "A novel concept of agile assembly machine for sets applied in the automotive industry". The International Journal of Advanced Manufacturing Technology 91 9-12 (2017): 4043-4054. http://dx.doi.org/10.1007/s00170-017-0109-4
• Costa, M.; Viana, G.; da Silva, LFM; Campilho, RDSG. "Effect of humidity on the fatigue behavior of adhesively bonded aluminum joints". Latin American Journal of Solids and Structures 14 1 (2017): 174-187. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010931026&partnerID=MN8TOARS
• Namesake, JTS; Campilho, RDSG. "EXtended Finite Element Method applied to the strength prediction of adhesively-bonded joints". Journal of Physics: Conference Series 843 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85021434773&partnerID=MN8TOARS
• Rocha, RJB; Campilho, RDSG. "Evaluation of different modeling conditions in the cohesive zone analysis of single-lap bonded joints". The Journal of Adhesion 94 (2017): 562-582. http://www.scopus.com/inward/record.url?eid=2-s2.0-85025655342&partnerID=MN8TOARS
• Rocha, RJB; Campilho, RDSG; Silva, FJG. "Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints". Procedia Manufacturing 13 (2017): 43-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030833600&partnerID=MN8TOARS
• Machado, JJM; Marques, EAS; Campilho, RDSG; da Silva, LFM. "Mode II fracture toughness of CFRP as a function of temperature and strain rate". Composites Part B: Engineering 114 (2017): 311-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013224925&partnerID=MN8TOARS
• Rocha, RJB; Campilho, RDSG. "Detailed investigation of the analysis conditions in the evaluation of bonded joints by cohesive zone models". Journal of Physics: Conference Series 843 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85021395708&partnerID=MN8TOARS
• Aries, BUT; Campilho, RDSG; Silva, FJG. "Experimental and numerical analysis of adhesively-bonded T joints under peel loads". Procedia Manufacturing 13 (2017): 51-58. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030871272&partnerID=MN8TOARS
• Costa, M.; Viana, G.; da Silva, LFM; Campilho, RDSG. "Environmental effect on the fatigue degradation of adhesive joints: A review". Journal of Adhesion 93 1-2 (2017): 127-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-84989243746&partnerID=MN8TOARS
• Machado, JJM; Marques, EAS; Campilho, RDSG; da Silva, LFM. "Mode I fracture toughness of CFRP as a function of temperature and strain rate". Journal of Composite Materials 51 23 (2017): 3315-3326. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029441311&partnerID=MN8TOARS
• Fernandes, RL; Campilho, RDSG. "Testing different cohesive law shapes to predict damage growth in bonded joints loaded in pure tension". Journal of Adhesion 93 1-2 (2017): 57-76. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979080273&partnerID=MN8TOARS
• Santos, TF; Campilho, RDSG. "Numerical modeling of adhesively-bonded double-lap joints by the eXtended Finite Element Method". Finite Elements in Analysis and Design 133 (2017): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019080063&partnerID=MN8TOARS
• Aries, BUT; Campilho, RDSG. "Analysis of adhesively-bonded T-joints by experimentation and cohesive zone models". Journal of Adhesion Science and Technology 31 18 (2017): 1998-2014. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013127779&partnerID=MN8TOARS
• Faneco, TMS; Campilho, RDSG; Silva, FJG; Lopes, RM. "Strength and fracture characterization of a novel polyurethane adhesive for the automotive industry". Journal of Testing and Evaluation 45 2 (2017): 398-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020089504&partnerID=MN8TOARS
• Carvalho, UTF; Campilho, RDSG. "Validation of pure tensile and shear cohesive laws obtained by the direct method with single-lap joints". International Journal of Adhesion and Adhesives 77 (2017): 41-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017327318&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Carbas, R.; Campilho, RDSG. "Effect of material on the mechanical behavior of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS
• Azevedo, JCS; Campilho, RDSG; Silva, FJG. "Shear fracture toughness and cohesive laws of adhesively-bonded joints". Materials Science and Technology 29 1 (2017): 124-129. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021956719&partnerID=MN8TOARS
• Leitão, ACC; Campilho, RDSG; Azevedo, JCS. "Shear cohesive law estimation of adhesive layers by digital image correlation". Materials Science and Technology 29 1 (2017): 119-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021961364&partnerID=MN8TOARS
• Santos, BUT; Campilho, RDSG. "Mixed-mode fracture analysis of composite bonded joints considering adhesives of different ductility". International Journal of Fracture 207 1 (2017): 55-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019675163&partnerID=MN8TOARS
• Domingues, NRE; Trojan, JC; Campilho, RDSG; Carbas, RJC; Banea, MD; da Silva, LFM. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Materials Science and Technology 29 1 (2017): 114-118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS
• Moreira, BMDN; Gouveia, Ronny M.; Silva, FJG; Campilho, RDSG. "A Novel Concept of Production and Assembly Processes Integration". Procedia Manufacturing 11 (2017): 1385-1395. http://dx.doi.org/10.1016/j.promfg.2017.07.268
• Barbosa, B.; Pereira, MT; Silva, FJG; Campilho, RDSG. "Solving Quality Problems in Tire Production Preparation Process: A Practical Approach". Procedia Manufacturing 11 (2017): 1239-1246. http://dx.doi.org/10.1016/j.promfg.2017.07.250
• Gomes, Tiago; Silva, FJG; Campilho, RDGS. "Reducing the Simulation Cost on Dual-phase Steel Stamping Process". Procedia Manufacturing 11 (2017): 474-481. http://dx.doi.org/10.1016/j.promfg.2017.07.138
• Castro, TAM; Silva, FJG; Campilho, RDSG. "Optimizing a Specific Tool for Electrical Terminals Crimping Process". Procedia Manufacturing 11 (2017): 1438-1447. http://dx.doi.org/10.1016/j.promfg.2017.07.274
• Rosa, C.; Silva, FJG; Ferreira, L. Pinto; Campilho, R.. "SMED methodology: The reduction of setup times for Steel Wire-Rope assembly lines in the automotive industry". Procedia Manufacturing 13 (2017): 1034-1042. http://dx.doi.org/10.1016/j.promfg.2017.09.110
• Carvalho, UTF; Campilho, RDSG. "Strength prediction of adhesively-bonded joints using improved cohesive law estimation". Welding Equipment and Technology 28 (2017): 25-31.
• de Sousa, CCRG; Campilho, RDSG; Marques, EAS; Costa, M; da Silva, LFM. "Overview of different strength prediction techniques for single-lap bonded joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231 1-2 (2016): 210-223. http://dx.doi.org/10.1177/1464420716675746
• Araújo, WFS; Silva, FJG; Campilho, RDSG; Matos, JA. "Manufacturing cushions and suspension mats for vehicle seats: a novel cell concept". The International Journal of Advanced Manufacturing Technology 90 5-8 (2016): 1539-1545. http://dx.doi.org/10.1007/s00170-016-9475-6
• Costa, M; Viana, G; da Silva, LFM; Campilho, RDSG. "Effect of humidity on the mechanical properties of adhesively bonded aluminum joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232 9 (2016): 733-742. http://dx.doi.org/10.1177/1464420716645263
• Marques, EAS; Campilho, RDSG; Da Silva, LFM. "Geometrical study of mixed adhesive joints for high-temperature applications". Journal of Adhesion Science and Technology 30 7 (2016): 691-707. http://www.scopus.com/inward/record.url?eid=2-s2.0-84954400731&partnerID=MN8TOARS
• de Almeida, FJS; Campilho, RDSG; Silva, FJG. "Strength prediction of T-peel joints by a hybrid spot-welding/adhesive bonding technique". The Journal of Adhesion 94 (2016): 181-198. http://www.scopus.com/inward/record.url?eid=2-s2.0-84999766452&partnerID=MN8TOARS
• Aries, BUT; Campilho, RDSG. "The effect of geometry and adhesive on the strength of T-Joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 27 (2016): 12-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021821577&partnerID=MN8TOARS
• Ribeiro, FMF; Campilho, RDSG; Carbas, RJC; da Silva, LFM. "Strength and damage growth in composite bonded joints with defects". Composites Part B: Engineering 100 (2016): 91-100. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975871923&partnerID=MN8TOARS
• Carvalho, UTF; Campilho, RDSG. "Application of the direct method for cohesive law estimation applied to the strength prediction of double-lap joints". Theoretical and Applied Fracture Mechanics 85 (2016): 140-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991205741&partnerID=MN8TOARS
• Costa, M.; Viana, G.; Canto, C.; Da Silva, LFM; Banea, MD; Chaves, F.; Campilho, RDSG; Fernandes, AA. "Effect of the size reduction on the bulk tensile and double cantilever beam specimens used in cohesive zone models". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 5 (2016): 968-982. http://www.scopus.com/inward/record.url?eid=2-s2.0-84988419036&partnerID=MN8TOARS
• Domingues, NRE; Campilho, RDSG; Carbas, RJC; Da Silva, LFM. "Experimental and numerical failure analysis of aluminum/composite single-L joints". International Journal of Adhesion and Adhesives 64 (2016): 86-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945588451&partnerID=MN8TOARS
• Leitão, ACC; Campilho, RDSG; Moura, DC. "Shear Characterization of Adhesive Layers by Advanced Optical Techniques". Experimental Mechanics 56 3 (2016): 493-506. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959153986&partnerID=MN8TOARS
• Moreira, RDF; Campilho, RDSG. "Parametric study of the reinforcement geometry on tensile loaded scarf adhesive repairs". Journal of Adhesion 92 7-9 (2016): 586-609. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962450111&partnerID=MN8TOARS
• Nunes, SLS; Campilho, RDSG; Da Silva, FJG; De Sousa, CCRG; Fernandes, TAB; Banea, MD; Da Silva, LFM. "Comparative failure assessment of single and double lap joints with varying adhesive systems". Journal of Adhesion 92 7-9 (2016): 610-634. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962468952&partnerID=MN8TOARS
• Marques, GP; Campilho, RDSG; Da Silva, FJG; Moreira, RDF. "Adhesive selection for hybrid spot-welded/bonded single-lap joints: Experimentation and numerical analysis". Composites Part B: Engineering 84 (2016): 248-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942362239&partnerID=MN8TOARS
• Ribeiro, TEA; Campilho, RDSG; da Silva, LFM; Goglio, L.. "Damage analysis of composite-aluminum adhesively-bonded single-lap joints". Composite Structures 136 (2016): 25-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944226919&partnerID=MN8TOARS
• Lopes, RM; Campilho, RDSG; da Silva, FJG; Faneco, TMS. "Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints". International Journal of Adhesion and Adhesives 67 (2016): 103-111.
• Fernandes, RL; Campilho, RDSG. "Numerical evaluation of dissimilar cohesive models to predict the behavior of Double-Cantilever Beam specimens". Procedia Structural Integrity 1 (2016): 42-49. http://dx.doi.org/10.1016/j.prostr.2016.02.007
• Azevedo, JCS; Campilho, RDSG; da Silva, FJG; Faneco, TMS; Lopes, RM. "Cohesive law estimation of adhesive joints in mode II condition". Theoretical and Applied Fracture Mechanics 80 (2015): 143-154. http://dx.doi.org/10.1016/j.tafmec.2015.09.007
• Campilho, RDSG; Moura, DC; Banea, MD; Da Silva, LFM. "Adhesive thickness effects of a ductile adhesive by optical measurement techniques". International Journal of Adhesion and Adhesives 57 (2015): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919608228&partnerID=MN8TOARS
• Campilho, RDSG; Leitão, ACC; Fernandes, RL; Azevedo, JCS; Banea, MD. "Cohesive law estimation in mode II of a ductile adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 26 (2015): 27-32. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984535678&partnerID=MN8TOARS
• Moreira, RDF; Campilho, RDSG. "Strength improvement of adhesively-bonded scarf repairs in aluminum structures with external reinforcements". Engineering Structures 101 (2015): 99-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937580339&partnerID=MN8TOARS
• Monteiro, JPR; Campilho, RDSG; Marques, EAS; da Silva, LFM. "Experimental estimation of the mechanical and fracture properties of a new epoxy adhesive". Applied Adhesion Science 3 1 (2015): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014288430&partnerID=MN8TOARS
• Constanta, C.J.; Campilho, RDSG; Moura, DC. "Tensile fracture characterization of adhesive joints by standard and optical techniques". Engineering Fracture Mechanics 136 (2015): 292-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939146360&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Carbas, RJC; Campilho, RDSG. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "A Study on Microstructure Characteristics of TEPs-modified Adhesives". Microscopy and Microanalysis 21 (2015): 7-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944063937&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; da Silva, LFM. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". Frattura ed Integrita Strutturale 31 (2015): 1-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920404080&partnerID=MN8TOARS
• Fernandes, TAB; Campilho, RDSG; Banea, MD; Da Silva, LFM. "Adhesive selection for single lap bonded joints: Experimentation and advanced techniques for strength prediction". Journal of Adhesion 91 10-11 (2015): 841-862. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937031747&partnerID=MN8TOARS
• Fernandes, RL; Campilho, RDSG; Leitão, ACC; Azevedo, JCS. "Numerical evaluation of the direct method for cohesive law estimation in shear by the End-Notched Flexure test". Procedia Engineering 114 (2015): 94-101.
• Campilho, RDSG; Fernandes, TAB. "Comparative evaluation of single-lap joints bonded with different adhesives by cohesive zone modeling". Procedia Engineering 114 (2015): 102-109.
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Baptista, APM. "Strap repairs using embedded patches: Numerical analysis and experimental results". Journal of Adhesion Science and Technology 28 14-15 (2014): 1530-1544. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899438669&partnerID=MN8TOARS
• Pinto, AMG; Ribeiro, NFQR; Campilho, RDSG; Mendes, IR. "Effect of adherent recessing on the tensile strength of single lap joints". Journal of Adhesion 90 8 (2014): 649-666. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898468128&partnerID=MN8TOARS
• Banea, MD; Silva, LFMD; Carbas, RJC; Campilho, RDSG. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): 19-22.
• Campilho, RDSG; Fernandes, TAB; Banea, MD; Silva, LFMD. "Cohesive Zone and Extended Finite Element modeling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): 5-12.
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "The effect of adhesive thickness on the mechanical behavior of a structural polyurethane adhesive". Journal of Adhesion 91 5 (2014): 331-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-84910090965&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Effect of temperature on the shear strength of aluminum single lap bonded joints for high temperature applications". Journal of Adhesion Science and Technology 28 14-15 (2014): 1367-1381. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899440602&partnerID=MN8TOARS
• Campilho, RDSG; Moura, DC; Banea, MD; Da Silva, LFM. "Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method". International Journal of Adhesion and Adhesives 53 (2014): 15-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901986334&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Carbas, RJC; Campilho, RDSG. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS
• Gonçalves, DJS; Campilho, RDSG; Da Silva, LFM; Fernandes, JLM. "The use of the boundary element method in the analysis of single lap joints". Journal of Adhesion 90 1 (2014): 50-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886715505&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG; Sato, C.. "Smart adhesive joints: An overview of recent developments". Journal of Adhesion 90 1 (2014): 16-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886678032&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Baptista, APM. "Numerical and experimental analysis of balanced and unbalanced adhesive single-lap joints between aluminum adherends". Journal of Adhesion 90 1 (2014): 89-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886656546&partnerID=MN8TOARS
• Banea, MD; Silva, LFMD; Carbas, RJC; Campilho, RDSG. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS
• Campilho, RDSG; Fernandes, TAB; Banea, MD; Silva, LFMD. "Cohesive Zone and Extended Finite Element modeling for bonded joint strength prediction". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921310067&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; Neto, JABP; Da Silva, LFM. "Modelling adhesive joints with cohesive zone models: Effect of the cohesive law shape of the adhesive layer". International Journal of Adhesion and Adhesives 44 (2013): 48-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874908653&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD. "Selection of the most suitable CZM conditions in the finite element strength prediction of adhesive joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 33-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896497139&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14.
• Campilho, RDSG; Moura, DC; Gonçalves, DJS. "Adhesive joints in natural fibre composites: Estimation of fracture properties". Materials Science and Technology 25 1 (2013): 31-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901453784&partnerID=MN8TOARS
• Campilho, RDSG; Pinto, AMG; Banea, MD; Chaves, FJP; da Silva, LFM. "Feasibility of the extended finite element method for the simulation of composite bonded joints". Materials Science Forum 730-732 (2013): 513-518. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880983808&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; Da Silva, LFM. "Tensile behavior of a structural adhesive at high temperatures by the extended finite element method". Journal of Adhesion 89 7 (2013): 529-547. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876114008&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG; de Jesus, AMP. "Characterization of aluminum single-lap joints for high temperature applications". Materials Science Forum 730-732 (2013): 721-726. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870764519&partnerID=MN8TOARS
• Campilho, RDSG; Moura, DC; Gonçalves, DJS; Da Silva, JFMG; Banea, MD; Da Silva, LFM. "Fracture toughness determination of adhesive and co-cured joints in natural fiber composites". Composites Part B: Engineering 50 (2013): 120-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877688451&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Magalhães, AG; Baptista, APM. "Numerical and experimental study of tensile strength of single and double-strap repairs". Materials Science Forum 730-732 (2013): 1018-1023. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870755592&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Magalhães, AG; Baptista, APM. "Strap repair optimization by using embedded patches". Materials Science Forum 730-732 (2013): 1036-1041. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870763400&partnerID=MN8TOARS
• Campilho, RDSG; Chaves, FJP; Pinto, AMG; Banea, MD; da Silva, LFM. "Influence of the cohesive law parameters on the strength prediction of adhesively-bonded joints". Materials Science Forum 730-732 (2013): 1000-1005. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870731639&partnerID=MN8TOARS
• Campilho, RDSG. "Flexural behavior of wooden beams repaired by carbon-epoxide patch bonding". Experimental Mechanics 22 (2013): 71-76.
• Banea, MD; da Silva, LFM; Campilho, RDSG. "An overview of the technologies for adhesive debonding on command". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 24 (2013): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896503151&partnerID=MN8TOARS
• Campilho, RDSG. "Adhesive, welded and weld-bonded single-lap joints: Numerical technique for strength prediction". Materials Science and Technology 24 1-2 (2012): 35-42. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894190018&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; da Silva, LFM. "Innovative finite element techniques for strength prediction of bonded joints | Innovative techniques for analyzing the finite element a rezistentei îmbinarilor lipite". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 26-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874208180&partnerID=MN8TOARS
• Neto, JABP; Campilho, RDSG; Da Silva, LFM. "Parametric study of adhesive joints with composites". International Journal of Adhesion and Adhesives 37 (2012): 96-101. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861589867&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; Neto, JABP; Da Silva, LFM. "Modelling of single-lap joints using cohesive zone models: Effect of the cohesive parameters on the output of the simulations". Journal of Adhesion 88 4-6 (2012): 513-533. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861122382&partnerID=MN8TOARS
• Campilho, RDSG; Pinto, AMG; Banea, MD; Da Silva, LFM. "Optimization study of hybrid spot-welded/bonded single-lap joints". International Journal of Adhesion and Adhesives 37 (2012): 86-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861591998&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Hard, LMP; Silva, RF; Baptista, APM. "Effect of plug-filling, testing velocity and temperature on the tensile strength of strap repairs on aluminum structures". Journal of Adhesion Science and Technology 26 10-11 (2012): 1481-1496. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864983395&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Mode II fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". Journal of Adhesion 88 4-6 (2012): 534-551. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861131754&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Effect of temperature on tensile strength and mode i fracture toughness of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 26 7 (2012): 939-953. http://www.scopus.com/inward/record.url?eid=2-s2.0-84864683421&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Moulds design for adhesive bulk and joint specimens manufacturing". Assembly Automation 32 3 (2012): 284-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870263974&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG. "High temperature adhesives for aerospace applications | Adezivi rezistenti la temperaturi ridicate utilization în aerospace applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 23 (2012): 16-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874217795&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Mode i fracture toughness of adhesively bonded joints as a function of temperature: Experimental and numerical study". International Journal of Adhesion and Adhesives 31 5 (2011): 273-279. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956128948&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; Chaves, FJP; Silva, LFMD. "EXtended Finite Element Method for fracture characterization of adhesive joints in pure mode i". Computational Materials Science 50 4 (2011): 1543-1549. http://www.scopus.com/inward/record.url?eid=2-s2.0-79151484108&partnerID=MN8TOARS
• Campilho, RDSG; Pinto, AMG; Banea, MD; Silva, RF; Da Silva, LFM. "Strength improvement of adhesively-bonded joints using a reverse-bent geometry". Journal of Adhesion Science and Technology 25 18 (2011): 2351-2368. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052646241&partnerID=MN8TOARS
• Campilho, RDSG; Rocha, JMM. "Strength prediction of adhesively bonded repairs on carbon-epoxy laminates by the single and double-strap techniques". Polymer Composites 32 8 (2011): 1254-1264. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960561944&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; Pinto, AMG; Da Silva, LFM; De Jesus, AMP. "Strength prediction of single- and double-lap joints by standard and extended finite element modeling". International Journal of Adhesion and Adhesives 31 5 (2011): 363-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956136790&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; Mendes, IR; Aires, SM; Baptista, APM. "Effect of hole drilling at the overlap on the strength of single-lap joints". International Journal of Adhesion and Adhesives 31 5 (2011): 380-387. http://www.scopus.com/inward/record.url?eid=2-s2.0-79956155908&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; da Silva, LFM. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 6-13.
• Banea, MD; da Silva, LFM; Campilho, RDSG. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-62.
• Banea, MD; De Sousa, FSM; Da Silva, LFM; Campilho, RDSG; De Pereira, AMB. "Effects of temperature and loading rate on the mechanical properties of a high temperature epoxy adhesive". Journal of Adhesion Science and Technology 25 18 (2011): 2461-2474. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052615334&partnerID=MN8TOARS
• Campilho, RDSG; Banea, MD; da Silva, LFM. "Comparative evaluation of bonded, welded and weldbonded structural joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 5-12. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859352202&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG. "Mechanical characterization of a high temperature epoxy adhesive". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 22 (2011): 58-61. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859324938&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Ramantani, DA; Morais, JJL; Barreto, AMJP; Domingues, JJMS. "Adhesively bonded repair proposal for wood members damaged by horizontal shear using carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 649-670. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953648463&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Barreto, AMJP; Morais, JJL; Domingues, JJMS. "Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining". Construction and Building Materials 24 4 (2010): 531-537. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085201&partnerID=MN8TOARS
• Pinto, AMG; Magalhães, AG; Campilho, RDSG; Silva, LFM; Chousal, JAG; Baptista, APM. "Shear modulus and strength of an acrylic adhesive by the Notched Plate Shear Method (Arcan) and the Thick Adherend Shear Test (TAST)". Materials Science Forum 636-637 (2010): 787-792. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649124558&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Pinto, AMG; Ramantani, DA; Morais, JJL; Domingues, JJMS. "Strength prediction of adhesively-bonded scarf repairs in composite structures under bending". Materials Science Forum 636-637 (2010): 233-238.  http://www.scopus.com/inward/record.url?eid=2-s2.0-75649108189&partnerID=MN8TOARS
• Banea, MD; Da Silva, LFM; Campilho, RDSG. "Temperature dependence of the fracture toughness of adhesively bonded joints". Journal of Adhesion Science and Technology 24 11-12 (2010): 2011-2026. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956562666&partnerID=MN8TOARS
• Pinto, AMG; Campilho, RDSG; De Moura, MFSF; Mendes, IR. "Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures". International Journal of Adhesion and Adhesives 30 5 (2010): 329-337. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955230130&partnerID=MN8TOARS
• Ramantani, DA; Campilho, RDSG; de Moura, MFSF; Marques, AT. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". Journal of Sandwich Structures and Materials 12 3 (2010): 369-390. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952144546&partnerID=MN8TOARS
• Barreto, AMJP; Campilho, RDSG; De Moura, MFSF; Morais, JJL; Santos, CL. "Repair of wood trusses loaded in tension with adhesively bonded carbon-epoxy patches". Journal of Adhesion 86 5-6 (2010): 630-648. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953640308&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): 31-37.
• Ramantani, DA; de Moura, MFSF; Campilho, RDSG; Marques, AT. "Fracture characterization of sandwich structures interfaces under mode I loading". Composites Science and Technology 70 9 (2010): 1386-1394. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953705429&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Pinto, AMG; Ramantani, DA. "Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II". Materials Science Forum 636-637 (2010): 1518-1524. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649128690&partnerID=MN8TOARS
• Pinto, AMG; Magalhães, AG; Campilho, RDSG; De Moura, MFSF; Baptista, APM. "Strength prediction and experimental validation of adhesive joints including polyethylene, carbon-epoxy and aluminum adherends". Materials Science Forum 636-637 (2010): 1157-1164. http://www.scopus.com/inward/record.url?eid=2-s2.0-75649104294&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Ramantani, DA; Morais, JJL; Domingues, JJMS. "Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures". Composites Science and Technology 70 2 (2010): 371-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-73149100343&partnerID=MN8TOARS
• de Moura, MFSF; Campilho, RDSG; Amaro, AM; Reis, PNB. "Interlaminar and intralaminar fracture characterization of composites under mode I loading". Composite Structures 92 1 (2010): 144-149. http://www.scopus.com/inward/record.url?eid=2-s2.0-70349439010&partnerID=MN8TOARS
• Banea, MD; da Silva, LFM; Campilho, RDSG. "Testing of RTV silicone adhesives for high temperature applications". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 21 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-79951686784&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Pinto, AMG; Morais, JJL; Domingues, JJMS. "Modelling the tensile fracture behaviour of CFRP scarf repairs". Composites Part B: Engineering 40 2 (2009): 149-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849088376&partnerID=MN8TOARS
• de Moura, MFSF; Fernandez, MVC; de Morais, AB; Campilho, RDSG. "Numerical analysis of the Edge Crack Torsion test for mode III interlaminar fracture of composite laminates". Engineering Fracture Mechanics 76 4 (2009): 469-478. http://www.scopus.com/inward/record.url?eid=2-s2.0-60649090383&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Barreto, AMJP; Morais, JJL; Domingues, JJMS. "Fracture behavior of damaged wood beams repaired with an adhesively-bonded composite patch". Composites Part A: Applied Science and Manufacturing 40 6-7 (2009): 852-859. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349091174&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Ramantani, DA; Morais, JJL; Domingues, JJMS. "Buckling behavior of carbon-epoxy adhesively-bonded scarf repairs". Journal of Adhesion Science and Technology 23 10-11 (2009): 1493-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949815184&partnerID=MN8TOARS
• de Moura, MFSF; Campilho, RDSG; Gonçalves, JPM. "Pure mode II fracture characterization of composite bonded joints". International Journal of Solids and Structures 46 6 (2009): 1589-1595. http://www.scopus.com/inward/record.url?eid=2-s2.0-59349112333&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Domingues, JJMS. "Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes". International Journal of Adhesion and Adhesives 29 2 (2009): 195-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-56249102417&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Ramantani, DA; Morais, JJL; Domingues, JJMS. "Tensile behavior of three-dimensional carbon-epoxy adhesively bonded single- and double-strap repairs". International Journal of Adhesion and Adhesives 29 6 (2009): 678-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349241275&partnerID=MN8TOARS
• Pinto, AMG; Magalhães, AG; Campilho, RDSG; de Moura, MFSF; Baptista, APM. "Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive". Journal of Adhesion 85 6 (2009): 351-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349105062&partnerID=MN8TOARS
• De Moura, MFSF; Campilho, RDSG; Gonçalves, JPM. "Mixed-mode cohesive damage model applied to the simulation of the mechanical behavior of laminated composite adhesive joints".  Journal of Adhesion Science and Technology 23 10-11 (2009): 1477-1491. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949872458&partnerID=MN8TOARS
• de Moura, MFSF; Campilho, RDSG; Gonçalves, JPM. "Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading". Composites Science and Technology 68 10-11 (2008): 2224-2230. http://www.scopus.com/inward/record.url?eid=2-s2.0-44749087315&partnerID=MN8TOARS
• Campilho, RDSG; de Moura, MFSF; Domingues, JJMS. "Using a cohesive damage model to predict the tensile behavior of CFRP single-strap repairs". International Journal of Solids and Structures 45 5 (2008): 1497-1512. http://www.scopus.com/inward/record.url?eid=2-s2.0-38049067010&partnerID=MN8TOARS
• De Moura, MFSF; Gonçalves, JPM; Chousal, JAG; Campilho, RDSG. "Cohesive and continuous mixed-mode damage models applied to the simulation of the mechanical behavior of bonded joints". International Journal of Adhesion and Adhesives 28 8 (2008): 419-426. http://www.scopus.com/inward/record.url?eid=2-s2.0-49749110781&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Domingues, JJMS; Morais, JJL. "Computational modeling of the residual strength of repaired composite laminates using a cohesive damage model". Journal of Adhesion Science and Technology 22 13 (2008): 1565-1591. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849128346&partnerID=MN8TOARS
• Campilho, RDSG; De Moura, MFSF; Ramantani, DA; Gonçalves, JPM. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". Materials Science and Technology 20 (2008): 81-86.
• Campilho, RDSG; De Moura, MFSF; Domingues, JJMS. "Numerical modeling of single and double overlap repairs in composite materials". Experimental Mechanics 15 (2008): 103-116.
• Campilho, RDSG; De Moura, MFSF; Domingues, JJMS. "Stress and failure analyzes of scarf repaired CFRP laminates using a cohesive damage model". Journal of Adhesion Science and Technology 21 9 (2007): 855-870. http://www.scopus.com/inward/record.url?eid=2-s2.0-34748816963&partnerID=MN8TOARS
• Campilho, RDSG. "Modeling the execution of single and double overlap repairs in composite materials". Ibero-American Journal of Mechanical Engineering 11 (2007): 35-52.
• Campilho, RDSG; De Moura, MFSF; Domingues, JJMS. "Effect of geometry on the residual tensile strength of repaired carbon-epoxy single lap joints". Materials Science and Technology 19 (2007): 68-74.
• Campilho, RRDSG; de Moura, MMFSF; Domingues, JJMS. "Modelling single and double-lap repairs on composite materials". Composites Science and Technology 65 13 (2005): 1948-1958. http://www.scopus.com/inward/record.url?eid=2-s2.0-23144463539&partnerID=MN8TOARS

• RJO Simões; Raul DSG Campilho; Francisco JG Silva; C. Prakash. "Design and Validation of Fixation Points of Polymeric Components for the Automotive Industry". 2024.
• AFV Pedroso; Vitor FC Sousa; NPV Sebbe; Francisco JG Silva; Raul DSG Campilho; RCM Sales-Contini; FR Nogueira. "A Review of INCONEL® Alloy's Non-conventional Machining Processes". 2024.
• JLTA Pereira; Raul DSG Campilho; Francisco JG Silva; IJ Sánchez-Arce; C. Prakash. "Process Improvement in Zamak Injection Machines for Automotive Component Fabrication". 2024.
• NPV Sebbe; F. Fernandes; Francisco JG Silva; Vitor FC Sousa; RCM Sales-Contini; Raul DSG Campilho; AFV Pedroso. "Wear Behavior Analysis of TiN/TiAlN Coated Tools in Milling of Inconel 718". 2024.
• Andresa Baptista; Gustavo F. Pinto; Vitor FC Sousa; Raul DSG Campilho; Filipe Fernandes. "Studying the Machining Performance of DSS Steel Using Single and Multilayered TiAlSiN Coated Tools Deposited by HiPIMS". 2024.
• Nóbrega JBS; Campilho, Raul. "Evaluation of the peel strength of adhesives by the floating roller peel test". In Contemporary Perspective on Science, Technology and Research. Vol 3 . BP International, 2024.
• JLTA Pereira; RDSG Campilho; FJG da Silva; IJ Sánchez-Arce. "Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive Industry". 2023.
• Sánchez-Arce IJ; Ramalho LDC; Gonçalves DC; Campilho, Raul; Belinha J. "Hyperelastic behavior of adhesives and its effect on bonded joints: An exploratory study". In Proceedings in Engineering Mechanics - Research, Technology and Education . Springer, 2023.
• da Costa JDC; Campilho, Raul. "Proposal of improved a waste collection system for urban environments". In Waste Recovery and Management: An Approach Toward Sustainable Development Goals . CRC Press, Taylor & Francis, 2023.
• Monteiro JPR; Campilho, Raul. "Evaluation of a novel structural adhesive for the automotive industry". In Techniques and Innovation in Engineering Research and Technology Vol 5 . BP International, 2023.
• Viana FAL; Campilho, Raul; Rocha RJB. "Bonded joint strength prediction by the inverse method". In Techniques and Innovation in Engineering Research and Technology Vol 5 . BP International, 2023.
• de Sousa JCM; Campilho, Raul; Silva FJG. "Quality improvement of a tire manufacturing assembly line". In Techniques and Innovation in Engineering Research and Technology Vol 5 . BP International, 2023.
• Peres LMC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Cohesive zone impact analysis of structural adhesive joints". In Versatile Approaches to Engineering and Applied Sciences: Materials and Methods . Özgür Publications, 2023.
• MMFO Roses; Campilho, Raul; Moreira RDF; Sánchez-Arce IJ; Rocha RJB. "Evaluation of the optimal tubular adhesive joint geometry for structural applications". In Versatile Approaches to Engineering and Applied Sciences: Materials and Methods . Özgür Publications, 2023.
• Neves LFR; Campilho, Raul; Sánchez-Arce IJ. "Mixed-mode fracture analysis of a structural adhesive by contour integral concepts". In Techniques and Innovation in Engineering Research Vol 7 . BP International, 2023.
• Pereira PNAAS; Campilho, Raul; Pinto AMG. "Development of components for autonomous underwater vehicles by design for excellence concepts". In Techniques and Innovation in Engineering Research Vol 7 . BP International, 2023.
• Barbosa RCN; Campilho, Raul; Silva FJG. "Numerical development and validation of a polyethylene component injection mold". In Techniques and Innovation in Engineering Research Vol 7 . BP International, 2023.
• Pedroso AFV; Campilho, Raul; Rocha RJB; Gomes MA. "Experimental characterization of self-healing composite structures to low-velocity impact applications". In Advances in engineering and environmental sciences . Özgür Publications, 2023.
• Pereira JPO; Campilho, Raul. "Experimental evaluation of the peel characteristics of structural adhesives". In Research and Developments in Engineering Research Vol 4 . BP International, 2023.
• Kumar SKS; Campilho, Raul; Silva FJG. "Development of a novel jig design to reduce manufacturing time of metal parts". In Research and Developments in Engineering Research Vol 4 . BP International, 2023.
• Fernandes RL; Campilho, Raul. "Shear fracture behavior of bonded joints by application of the direct integration method". In Research and Developments in Engineering Research Vol 4 . BP International, 2023.
• de Oliveira HDBCL; Campilho, Raul; Silva FJG. "Development of an autonomous and compact cargo vehicle for industrial applications". In Research and Developments in Engineering Research Vol 4 . BP International, 2023.
• Lopes JPM; Campilho, Raul. "Calculation approach for the design of adhesive joints under predominant peel". In Research Highlights in Science and Technology Vol. 3 . BP International, 2023.
• Gomes LAR; Campilho, Raul; Brave JPA. "Overview on the application of cohesive zone models for impact strength evaluation of adhesive bonded joints". In Research Highlights in Science and Technology Vol. 3 . BP International, 2023.
• Lopes JPM; Campilho, Raul; Bellali MA; Baghdadi M. "Adhesive type, geometry, bonding method, and adherend material effects on the strength of adhesively-bonded T-joints". In Research Highlights in Science and Technology Vol 3 . BP International, 2023.
• Silva JESM; Campilho, Raul. "Modelling of bonded tubular scarf joints by the cohesive zone approach". In Research Highlights in Science and Technology Vol 3 . BP International, 2023.
• Oliveira TJS; Campilho, Raul; Kirgiz MS; Kumar MV; Alzein R. "Evaluation of tubular adhesively-bonded joints under torsion." In Research and Developments in Engineering Research Vol 6 . BP International, 2023.
• Pereira PJPD; Campilho, Raul; Kirgiz MS; Kumar MV; Raj JCJ. "Proposal of a soft robotics gripper solution manufactured by additive manufacturing". In Research and Developments in Engineering Research Vol 6 . BP International, 2023.
• Gonçalves LS; Campilho, Raul; Kirgiz MS; Kumar MV; Raj JCJ. "Quality improvement in the automotive components industry by innovative 3D scanner solution". In Research and Developments in Engineering Research. Vol 7 . BP International, 2023.
• Soares ACP; Campilho, Raul; Kirgiz MS; Kumar MV; Alzein R. "Improvement of the manufacturing process of active pharmaceutical ingredients". In Research and Developments in Engineering Research. Vol 7 . BP International, 2023.
• Carvalho, UTF; Campilho, RDSG. "Strength prediction of adhesively-bonded joints with cohesive laws estimated by digital image correlation". In Applied Computer Engineering . Ponta Grossa, Brazil: Atena Editora, 2022.
• Namesake JTS; Campilho, Raul. "Use of advanced numerical methods for the strength prediction of peel-dominated bonded joints". In New Trends in Physical Science Research Vol. 3 . BP International, 2022.
• Rocha RJB; Campilho, Raul. "Evaluation of bonded joints by cohesive zone models: a descriptive study". In New Trends in Physical Science Research Vol. 3 . BP International, 2022.
• DMSRB Axe; Campilho, Raul. "Insight on the use of cohesive zone models for impact strength analysis of adhesive joints". In Technological Innovation in Engineering Research Vol. 3 . BP International, 2022.
• Eusébio SML; Campilho, Raul. "Application of advanced numerical techniques for the analysis of tubular adhesive joints". In Technological Innovation in Engineering Research Vol. 3 . BP International, 2022.
• Ferreira JAM; Campilho, Raul. "Evaluation of adhesively-bonded stiffeners by numerical modeling". In Technological Innovation in Engineering Research Vol. 3 . BP International, 2022.
• Antunes RPRO; Campilho, Raul. "Tensile cohesive laws of adhesive joints as a function of the adhesive thickness". In Technological Innovation in Engineering Research Vol. 3 . BP International, 2022.
• Oliveira TJS; Campilho, Raul; Cardoso MG. "Analysis of torsional tubular adhesive joints using a numerical finite element approach". In Research Aspects in Chemical and Materials Sciences Vol. 1 . BP International, 2022.
• Lopes JPM; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ. "Advanced numerical techniques for strength prediction of adhesive joints under peel loadings". In Research Developments in Science and Technology Vol. 7 . BP International, 2022.
• MFMO Roses; Campilho, Raul; Moreira RDF. "Geometric optimization of tubular adhesive joints by cohesive models". In Technological Innovation in Engineering Research Vol. 4 . BP International, 2022.
• Moreira FJP; Campilho, Raul. "Advanced numerical techniques to design T-bonded joints". In Technological Innovation in Engineering Research Vol. 4 . BP International, 2022.
• Vidal AR; Campilho, Raul; Silva FJG; Sánchez-Arce IJ. "Re-purposing a welding frame for a tube cutting machine". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering) . Springer, 2022.
• Sousa HRV; Silva FJG; Campilho, Raul; Pinto AMG; Close JS. "Study of the influence of laser welding parameters on the weld quality and microstructure of S355JR structural steel". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering) . Springer, 2022.
• Sousa VFC; Silva FJG; Pinto AMG; Campilho, Raul; Barbosa M; Costa R. "Milling a titanium alloy using different machining parameters: A comparative study on tool wear, tool life and performance". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering) . Springer, 2022.
• Silva FJG; Sousa VFC; Campilho, Raul; Pinto AMG; Close JS. "Optimizing the Ag filler metal content on brazing of Cu-Stainless Steel pipes joints for carbon dioxide refrigeration plants". In Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus (Lecture Notes in Mechanical Engineering) . Springer, 2022.
• Pereira PNAAS; Campilho, Raul; Pinto AMG. "Mechanical design of a wireless charger housing for autonomous underwater vehicles". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI . Iksad Publications, 2021.
• Barros RBP; Campilho, Raul; Sánchez-Arce IJ; Dionísio JMM. "Experimental and numerical evaluation of the cracked-lap shear specimen for fracture characterization of structural adhesives". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI . Iksad Publications, 2021.
• Ferreira LRF; Campilho, Raul; Barbosa DR; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Numerical modeling of tubular adhesive joints with chamfer modification for the automotive and constructions industries". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI . Iksad Publications, 2021.
• Silva MVPA; Peres LMC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ; Moreira RDF. "Adaption of the cohesive zone modeling technique for tubular adhesive joint impact analysis". In Proceedings of IACCS-VI, International Asian Congress on Contemporary Sciences-VI . Iksad Publications, 2021.
• Fonseca EMM; Oliveira PN; Campilho, Raul. "Thermal analysis of steel profiles under fire: the lumped capacitance method vs the finite element method". In Mechanics and Materials in Design: Theory, Experiments and Applications in Engineering and Biomechanics . INEGI Publications, 2022.
• Pinheiro AES; Campilho, Raul; Moreira RDF; Sánchez-Arce IJ. "Analytical analysis of tubular adhesive joints". In Technological Innovation in Engineering Research Vol 7 . BP International, 2022.
• Alves DL; Campilho, Raul; Moreira RDF. "Scarf adhesive joints between different adherends by experimental and numerical modeling". In Technological Innovation in Engineering Research Vol 7 . BP International, 2022.
• Silva DFO; Campilho, Raul. "Validation of numerical approach for the analysis of adhesively-bonded scarf joints". In Technological Innovation in Engineering Research Vol 7 . BP International, 2022.
• Ribeiro JPSMB; Campilho, RDSG; Rocha RJB. "Mixed-mode cohesive properties of a thin adhesive layer". In Current Overview on Science and Technology Research Vol. 1 . BP International, 2022.
• Ribeiro JPSMB; Campilho, Raul; Rocha RJB. "Mixed-mode cohesive properties of a thin adhesive layer". In Current Overview on Science and Technology Research Vol. 1 . BP International, 2022.
• Barbosa NGC; Campilho, Raul. "Numerical evaluation of different adhesive joint configurations by cohesive zone modeling". In Current Overview on Science and Technology Research Vol. 1 . BP International, 2022.
• Silva JESM; Campilho, Raul; Sánchez-Arce IJ; Moreira RDF. "Geometry effect on the tensile behavior of adhesively-bonded tubular scarf joint". In Current Overview on Science and Technology Research Vol. 2 . BP International, 2022.
• Pereira TFC; Campilho, Raul; Rocha RJB; Sánchez-Arce IJ. "Impact analysis of composite adhesive joints by CZM modeling". In Current Overview on Science and Technology Research Vol. 2 . BP International, 2022.
• Ramesh V; Campilho, Raul. "Experimental and numerical study on single-lap bonded joints by the extended finite element method". In Current Overview on Science and Technology Research Vol. 2 . BP International, 2022.
• Pinto JEC; Campilho, Raul. "Mechanical and fracture property estimation of a structural adhesive". In Techniques and innovation in Engineering Research Vol. 1 . BP International, 2022.
• Carvalho PMD; Campilho, Raul; Sánchez-Arce IJ; Rocha RJB; Soares ARF. "A comprehensive experimental study on bi-adhesive technique applied to structural T-joints". In Techniques and innovation in Engineering Research Vol. 1 . BP International, 2022.
• Fernandes RL; Campilho, Raul. "Cohesive zone model estimation of the tensile behavior of adhesive joints". In Techniques and Innovation in Engineering Research Vol 3 . BP International, 2022.
• Fernandes TAB; Campilho RDSG. "Numerical evaluation of single-lap adhesive joints under different geometries and adhesive types". In Techniques and Innovation in Engineering Research Vol 3 . BP International, 2022.
• Sánchez-Arce, IJ; Ramalho, LDC; Campilho, RDSG; Belinha, JAOP. "Development of an elasto-plastic meshless technique to analyse bonded structures". In Industrial Applications of Adhesives . Heidelberg, Germany: Springer, 2021.
• Ramalho, LDC; Campilho, Raul; Sánchez-Arce, IJ; Belinha, J.. "Using a meshless method to predict the strength of adhesive single lap joints". In Encyclopedia of Materials: Composites , edited by Brabazon, D.. Amsterdam: Elsevier, 2021.
• Ramalho LDC; Dionísio JMM; Sánchez-Arce IJ; Gonçalves DC; Campilho, Raul; Belinha J. "Intensity of singular stress fields in single lap joints using the radial point interpolation method". In Proceedings of DCE21, 4th Doctoral Congress in Engineering . FEUP Editions, 2021.
• Gonçalves DC; Belinha J; Campilho, Raul. "Topology optimization using a bi-directional evolutionary algorithm combined with the NNRPIM". In Proceedings of DCE21, 4th Doctoral Congress in Engineering . FEUP Editions, 2021.
• Leal, AJS; Campilho, RDSG. "Experimental shear fracture characterization of adhesively-bonded joints". In Innovation, Engineering and Entrepreneurship . Heidelberg, Germany: Springer, 2019.
• Nunes, FAA; Campilho, RDSG. "Evaluation of mixed-mode fracture in adhesively-bonded joints". In Innovation, Engineering and Entrepreneurship . Heidelberg, Germany: Springer, 2019.
• de Sousa Marques, Eduardo André; Akhavan-Safar, Alireza; Campilho, Raul Duarte Salgueiral Gomes; Carbas, Ricardo João Camilo; da Silva, Lucas Filipe Martins. "Advanced Numerical Models for Predicting the Load and Environmentally Dependent Behavior of Adhesives and Adhesive Bonded Joints". In State of the Art and Future Trends in Material Modeling , 211-244. Springer International Publishing, 2019.
• Carvalho, UTF; Campilho, RDSG. "Strength prediction of adhesive-bonded joints with cohesive laws estimated by the direct method". In (Inter)Multidisciplinary Studies in Exact Sciences and Technologies . Ponta Grossa, Brazil: Atena Editora, 2019.
• Cardoso MG; Campilho, Raul. "Adherend material effect on the tensile strength on adhesive bonded tubular joints". In Proceedings of DCE19, 3rd Doctoral Congress in Engineering . FEUP Editions, 2019.
• Ramalho LDC; Campilho, Raul; Belinha JAOP. "Using radial point interpolation meshless methods to analyze adhesive single-lap joints". In Proceedings of DCE19, 3rd Doctoral Congress in Engineering . FEUP Editions, 2019.
• Campilho, RDSG; da Silva, LFM; Banea, MD. "Adhesive Bonding of Polymer Composites to Lightweight Metals". In Joining of Polymer-Metal Hybrid Structures: Principles and Applications . New Jersey, United States: Wiley, 2018.
• Banea, MD; da Silva, LFM; Campilho, RDSG. "Principles of Adhesive Bonding". In Joining of Polymer-Metal Hybrid Structures: Principles and Applications . New Jersey, United States: Wiley, 2018.
• da Silva, LFM; Marques, EAS; Campilho, RDSG. "Design rules and methods to improve joint strength". In Handbook of Adhesion Technology . Heidelberg, Germany: Springer, 2018.
• Machado, RMD; Campilho, RDSG; Rocha, RJB; Silva, FJG. "Modelling stepped-lap adhesive joints by the extended finite element method". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0 . Amsterdam, Netherlands: IOS Press, 2018.
• Ferreira, LRF; Campilho, RDSG; Barbosa, DR. "Geometrical optimization of axially loaded tubular adhesive joints by finite elements". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0 . Amsterdam, Netherlands: IOS Press, 2018.
• Silva, FJG; Campilho, RDSG; Ferreira, LP; Pereira, MT. "Establishing guidelines to improve the high-pressure die casting process of complex aesthetics parts". In Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0 . Amsterdam, Netherlands: IOS Press, 2018.
• Viana FAL; Campilho, Raul; Rocha RJB. "Fracture modelling of adhesively-bonded joints by an inverse method". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture . Edições UBI, 2018.
• Ribeiro JPSMB; Campilho, Raul; Rocha RJB. "Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture . UBI Editions, 2018.
• Machado RMD; Campilho, Raul; Rocha RJB. "Design of step bonded joints by the eXtended Finite Element Method". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture . Edições UBI, 2018.
• Costa M; Viana, G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of PCF2018, XVI Portuguese Conference on Fracture . Edições UBI, 2018.
• Moreira FJP; Campilho, Raul. "Numerical analysis of bonded joints by the extended finite element method". In New Trends in Fatigue and Fracture . Ed. IDMEC, 2018.
• Nunes FAA; Campilho, Raul. "Asymmetric tapered double-cantilever beam specimen to predict mixed-mode fracture of structural adhesives". In New Trends in Fatigue and Fracture . Ed. IDMEC, 2018.
• Nunes FAA; Campilho, Raul. "Mixed-mode fracture of bonded joints using the asymmetric tapered double-cantilever beam test". In Integrity/Reliability/Failure in Automotive, locomotive, Aerospace, Civil Engineering and Biomechanics . INEGI Editions, 2018.
• RMD Axe; Campilho, Raul. "Advanced numerical techniques applied to the strength prediction of stepped-lap adhesive joints". In Integrity/Reliability/Failure in Automotive, locomotive, Aerospace, Civil Engineering and Biomechanics . INEGI Editions, 2018.
• Campilho, RDSG. "Introduction". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• da Silva, LFM; Costa, M.; Viana, G.; Campilho, RDSG. "Analytical modeling for the single-lap joint". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Campilho, RDSG. "Cohesive Zone Modeling for static applications". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Campilho, RDSG; Costa, M.; Viana, G.; da Silva, LFM. "Parameter identification in Cohesive Zone Modeling". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Campilho, RDSG; Fernandes, TAB. "Extended Finite Element modeling in static applications". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Campilho, RDSG; Moreira, RDF. "Numerical modeling of bonded joints and repairs". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Marques, EAS; Campilho, RDSG; Flaviani, M.; da Silva, LFM. "Mixed adhesive joints for the aerospace industry". In Strength prediction of adhesively-bonded joints . Boca Raton, United States: CRC Press, Taylor & Francis, 2017.
• Campilho, RDSG. "Recent innovations in biocomposite products". In Biocomposites for high-performance applications: Current barriers and future needs towards industrial development . United Kingdom: Woodhead Publishing, 2017.
• Rocha RJB; Campilho, Raul; Silva FJG. "Comparison of different modeling conditions in the strength prediction of bonded joints by cohesive models". In Business Sustainability VI . 2100 Projects Association, 2017.
• Pinto LCM; Silva FJG; Campilho, Raul; Ferreira LP. "Lean manufacturing applied to the steel belt cutting in tire manufacturing". In Business Sustainability VI . 2100 Projects Association, 2017.
• Alves DL; Campilho, RDSG; Moreira RDF; Silva FJG. "Scarf bonded joints between different adherends". In Business Sustainability VI . 2100 Projects Association, 2017.
• Costa M; Viana G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of DCE17, 2nd Doctoral Congress in Engineering . FEUP Edições, 2017.
• Silva JOS; Campilho, Raul. "Experimental and cohesive zone modeling analysis of adhesively-bonded stepped joints". In Progress in Mechanics and Materials in Design . INEGI Editions, 2017.
• Alves DL; Campilho, Raul; Moreira RDF. "Hybrid adhesively-bonded scarf joints: Experimentation and cohesive zone simulations". In Progress in Mechanics and Materials in Design . INEGI Editions, 2017.
• Campilho, RDSG. "Introduction". In Natural fiber composites . Boca Raton, United States: CRC Press, Taylor & Francis, 2016.
• Campilho, RDSG; da Silva, LFM. "Joint design in natural fibre composites". In Natural fibre composites . Boca Raton, United States: CRC Press, Taylor & Francis, 2016.
• Santos MAS; Campilho, Raul. "Numerical evaluation of the mixed-mode fracture of composite bonded joints". In New Trends on Integrity, Reliability and Failure . INEGI Editions, 2016.
• Marques GP; Campilho, Raul; da Silva FJG. "Experimental and numerical analysis of adhesively bonded-welded hybrid single-lap joints: Effect of the adhesive type". In New Trends on Integrity, Reliability and Failure . INEGI Editions, 2016.
• Costa R; da Silva FJG; Campilho, Raul. "A novel concept of agile assembly machine for housings of motor widescreen wipers". In New Trends on Integrity, Reliability and Failure . Edições INEGI, 2016.
• Moreira BMDN; da Silva FJG; Campilho, Raul. "Process integration through automated sub-assembly line". In New Trends on Integrity, Reliability and Failure . INEGI Editions, 2016.
• Costa M; Viana G; da Silva LFM; Campilho, Raul. "Development of a cohesive zone element for adhesive joints subjected to fatigue and humidity degradation". In Proceedings of EURADH 2016, 11th European Adhesion Conference . IOM Communications, 2016.
• Campilho, RDSG; da Silva, LFM. "Mode I fatigue and fracture behavior of carbon fiber reinforced polymer (CFRP) composite joints (Chapter 4)". In Fatigue and fracture of adhesively bonded composite joints: Behavior, simulation and modeling . Woodhead Publishing, 2015.
• da Silva, LFM; Campilho, RDSG. "Design of adhesively-bonded composite joints (Chapter 2)". In Fatigue and fracture of adhesively bonded composite joints: Behavior, simulation and modeling . Woodhead Publishing, 2015.
• Costa M; Viana G; da Silva LFM; Campilho, Raul. "Humidity effects on the fatigue behaviour of adhesively bonded aluminium DCB joints". In Proceedings of DCE 2015, 1st Doctoral Congress in Engineering . FEUP Edições, 2015.
• Araújo L; Silva FJG; Campilho, Raul. "Adding value to metal shear machines through innovative tools". In Business Sustainability IV . 2100 Projects Association, 2015.
• Ferreira A; Silva FJG; Campilho, Raul. "Developing innovative tool holder systems for press-brake machines". In Business Sustainability IV . 2100 Projects Association, 2015.
• Luís JB; Silva FJG; Campilho, Raul. "Door glass lifting mechanical devices: from manual to fully-automated assembly line". In Business Sustainability IV . 2100 Projects Association, 2015.
• Araújo W; Silva FJG; Campilho, Raul; Matos J. "Improving the competitiveness of a suspension mat production line". In Business Sustainability IV . 2100 Projects Association, 2015.
• Matos JA; Silva FJG; Campilho, Raul; Soares M. "Lean-manufacturing applied to a machining cell". In Business Sustainability IV . 2100 Projects Association, 2015.
• Campilho, Raul; Banea MD; da Silva LFM. "Advanced techniques for estimation of the tensile fracture toughness of adhesive joints". In Proceedings of PCF 2014, XIII Portuguese Conference on Fracture . UTAD Editions, 2014.
• Banea MD; da Silva LFM; Campilho, RDSG. "Effects of adhesive thickness on the fracture of polyurethane adhesive joints". In Proceedings of PCF 2014, XIII Portuguese Conference on Fracture . UTAD Editions, 2014.
• Banea MD; da Silva LFM; Carbas, RJC; Campilho, Raul. "Characterization of a structural polyurethane adhesive modified with thermally expandable particles". In Proceedings of EURADH 2014, 10th European Adhesion Conference . IOM Communications, 2014.
• Banea MD; da Silva LFM; Campilho, Raul. "Effect of adhesive thickness on mode I fracture toughness of a structural polyurethane adhesive for automotive applications". In Trends in Adhesion and Adhesives, Volume VI . AIMEN Technology Center, 2013.
• Campilho, RDSG. "End-Notched Flexure". In Best Practices in Preparing and Testing Adhesive Joints . Weinheim, Germany: Wiley-VCH Verlag GmbH & Co, 2012.
• Campilho, Raul; Banea MD; da Silva LFM. "Experimental and Finite Element design of single-lap joints by adhesive-bonding, welding and hybrid joining". In Proceedings of YIC 2012, 1st European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference . UA Editions, 2012.
• Campilho, Raul; Banea MD; da Silva LFM. "Numerical modeling of adhesively-bonded joints: effect of the cohesive zone model parameters". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture . Nozzle, 2012.
• Campilho, Raul; Pinto AMG; Banea MD. "Modelling of composite bonded joints by the extended finite element method". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture . Nozzle, 2012.
• Banea MD; da Silva LFM; Campilho, Raul. "Fracture tests of adhesive joints bonded with a high temperature epoxy adhesive". In Proceedings of PCF 2012, XIII Portuguese Conference on Fracture . Nozzle, 2012.
• Campilho, Raul; Afonso PFP; Banea MD; da Silva LFM. "Experimental optimization of single-lap and T-peel joints by bonding, welding and hybrid joining". In Experimental Mechanics: New Trends and Perspectives . INEGI Editions, 2012.
• Ribeiro NFQR; Campilho, Raul; Pinto AMG. "Optimization of single-lap joints by slotting and chamfering the adherends at the overlap". In Experimental Mechanics: New Trends and Perspectives . INEGI Editions, 2012.
• Campilho, Raul. "Fibre-reinforced composite materials: an improvement in sustainability". In Business Sustainability II . UMinho Editions, 2011.
• Campilho, Raul; Banea MD; da Silva LFM. "Influence of cohesive parameters on the prediction of adhesive joint strength". In Proceedings of CIBEM10, X Ibero-American Congress on Mechanical Engineering . FEUP Editions, 2011.
• Campilho, Raul; Pinto AMG; Neto JABP; Banea MD; da Silva LFM. "Experimental and finite element analysis of hybrid (welded/adhesive) single lap joints". In Proceedings of CIBEM10, X Ibero-American Congress on Mechanical Engineering . FEUP Editions, 2011.
• Campilho, Raul. "Taper angle optimization of scarf repairs in carbon-epoxy laminates". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010 . Engbook, 2010.
• Pinto AMG; Campilho, Raul; Mendes IR; Tough LMP; Silva RF; Baptista APM. "Tensile behavior of single and double-strap repairs on aluminum structures". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010 . Engbook, 2010.
• Banea MD; da Silva LFM; Campilho, Raul. "Mode I fracture toughness of adhesively bonded joints in a high temperature environment". In Proceedings of CIFIE 2010, Iberian Conference on Fracture and Structural Integrity 2010 . Engbook, 2010.
• Campilho, Raul; Banea MD; Pinto AMG; da Silva LFM. "Determination of the cohesive law in mode I of a carbon-epoxy composite bonded joint by the extended finite element method". In Proceedings of ENMEC2010, National Meeting on Composite Materials and Structures . FEUP Editions, 2010.
• Campilho, Raul; Banea MD; Pinto AMG; da Silva LFM. "Repair of wooden beams with carbon-epoxy composite laminates". In Proceedings of ENMEC2010, National Meeting on Composite Materials and Structures . FEUP Editions, 2010.
• Pinto AMG; Magalhães AG; Campilho, Raul; Baptista APM. "Adhesive bonding of polyethylene and composite materials". In Proceedings of ENMEC2010, National Meeting on Composite Materials and Structures . FEUP Editions, 2010.
• Ramantani DA; Campilho, Raul. "Modelling adhesive bonded repairs on sandwich structures with the use of cohesive mixed-mode damage models". In Proceedings of Composites2009, 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites . ECCOMAS, 2009.
• Campilho, Raul. "Strength prediction of adhesively-bonded repairs on carbon-epoxy laminates by the single and double-strap techniques". In Integrity, Reliability and Failure: Challenges and Opportunities . INEGI Editions, 2009.
• Pinto AMG; Campilho, Raul. "Effect of plug filling, testing velocity and temperature on the tensile strength of single and double-strap repairs on aluminum structures". In Integrity, Reliability and Failure: Challenges and Opportunities . INEGI Editions, 2009.
• Campilho, Raul. "Repair of wooden beams damaged by crushing with carbon-epoxy composites". In Proceedings of JLBE 2009, II Luso-Brazilian Conference on Engineering Education and Technology . Publindústria, 2009.
• Campilho, RDSG. "Optimization of the geometry of adhesive repairs by simple overlap in composite materials". In Proceedings of JLBE 2009, II Luso-Brazilian Conference on Education and Technology in Engineering . Publindústria, 2009.
• Pinto AMG; Magalhães AG; Campilho, Raul; Baptista APM. "Experimental determination of the shear strength of simple overlap adhesive joints with polyethylene and polypropylene substrates". In Proceedings of JLBE 2009, II Luso-Brazilian Conference on Engineering Education and Technology . Publindústria, 2009.
• Pinto AMG; Magalhães AG; Campilho, Raul; Silva LFM; Baptista APM. "Experimental determination of the critical energy release rate in mode I of an acrylic adhesive by the Double Cantilever Beam (DCB) test". In Proceedings of JLBE 2009, II Luso-Brazilian Conference on Education and Technology in Engineering . Publindústria, 2009.
• de Moura, MFSF; Campilho, RDSG; Ramantani, DA; Marques, AT. "Repair of composites and sandwich structures". In Advanced School on Sandwich Structures . Porto, Portugal: FEUP, 2008.
• Ramantani DA; Campilho, Raul. "Stress and failure analysis of repaired sandwich composite beams using a cohesive damage model". In Proceedings of 8th International Conference on Sandwich Structures (ICSS 8) . FEUP Editions, 2008.
• Ramantani DA; Campilho, Raul. "Cohesive mixed-mode damage model applied to the simulation of the mechanical behavior of a repaired sandwich beam". In Proceedings of 13th European Conference on Composite Materials . ECCM13 book, 2008.
• Campilho, Raul. "Obtaining the cohesive laws of a trapezoidal mixed-mode damage model using an inverse method". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture . FCT/UNL Publications, 2008.
• Ramantani DA; Campilho, Raul. "Numerical simulation of the mechanical behavior of a repaired sandwich beam using a cohesive damage model". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture . FCT/UNL Publications, 2008.
• Pinto AMG; Magalhães AG; Campilho, Raul. "Adhesively bonded single-lap joints between polyethylene and other materials. Numerical analysis and experimental results". In Proceedings of PCF 2008 - 11th Portuguese Conference on Fracture . FCT/UNL Publications, 2008.
• Campilho, Raul. "Repairs in composite materials". In Engineering in the Fight Against Poverty: For Development and Competitiveness . INEGI Editions, 2008.
• Campilho, Raul. "Application of cohesive models for determining the mechanical strength of glued joints". In Engineering in the Fight against Poverty: For Development and Competitiveness . INEGI Editions, 2008.
• Ramantani DA; Nóvoa PJRO; Campilho, Raul. "A finite element and experimental study of composite tubular joints". In Proceedings of Materiais 2007, IV International Materials Symposium | XIII Portuguese Materials Society Meeting . FEUP Editions, 2007.
• Campilho, RDSG. "Damage Initiation and Growth in Single and Double-Lap Repairs on CFRP Composite Joints with Different Configurations". In Proceedings of Materials 2005, III International Materials Symposium | XII Portuguese Materials Society Meeting . 2005.
• Campilho, Raul. "Modeling the execution of repairs in composite materials". In Proceedings of JPE2004, 4th Conference on Mechanics, Automotive, Industrial Organization and Management, Energy and Environment . Porto, Portugal: Publindústria, 2004.
• Campilho, Raul. "Bus with capacity to transport passengers with lower limb disabilities". In Proceedings of 3rd Polytechnic Engineering Conference . Coimbra, Portugal: Edições ISEC, 2003.
• Pereira, PNAAS; Pinto, AM; Campilho, RDSG. Housing components for autonomous underwater vehicles: design and structural validation . Saarbrücken, Germany: Lambert Publishing. 2022.
• Costa, RFR; Campilho, RDSG; Silva, FJG. Concept design and product development of a thermoplastic motorbike instrument cluster . Chisinau, Moldova: Eliva Press. 2022.
• Kumar SKS; Campilho, RDSG; Silva, FJG. Modular jig design approach in the metalworking industry: Case study for process optimization . Saarbrücken, Germany: Lambert Publishing. 2022.
• Swertvaegher GJ; Campilho, Raul; Silva FJG. Fully-automatic solutions for inspection and packaging in the automotive industry . Saarbrücken, Germany: Lambert Publishing. 2022.
• Vandermeulen V.; Silva FJG; Campilho, Raul. Designing a novel automatic laser welding equipment for “T”-Profiles . Chisinau, Moldova: Eliva Press. 2022.
• Loureiro, FJCFB; Campilho, RDSG. Mixed-mode behavior of composite adhesive joints: J-integral approach for fracture evaluation . Saarbrücken, Germany: Lambert Publishing. 2020.
• Carvalho, UTF; Campilho, RDSG. Modeling adhesive joints by cohesive models using the direct method . Saarbrücken, Germany: Lambert Publishing. 2017.
• Ribeiro, TEA; Campilho, RDSG. Adhesive-bonded joints in hybrid structures . Saarbrücken, Germany: Lambert Publishing. 2016.
• Rocha, RJB; Campilho, RDSG. Modeling conditions effect on the cohesive analysis of bonded joints . Saarbrücken, Germany: Lambert Publishing. 2016.
• Campilho, RDSG. Adhesive-bonded repair techniques for composites and wood: Experimental and Finite Element approaches . Saarbrücken, Germany: Scholars' Press. 2014.
• da Silva, LFM; Campilho, RDSG. Advances in numerical modelling of adhesive joints . Heidelberg, Germany: Springer. 2012.
• Campilho, RDSG. Finite Element Method: Tools for Structural Analysis . Publindústria. 2012.

• https://orcid.org/0000-0003-4167-4434
• https://www.scopus.com/authid/detail.uri?authorId=22033460100
• https://loop.frontiersin.org/people/1670254