Dr. Mauro Zarrelli, born in 1974, received his Master's degree cum Laude in Material Engineering at the University of Naples in 1998 and his PhD degree in Advanced Materials at Cranfield University in 2004. He was an assistant Researcher at the School of Industrial and Manufacturing Science at Cranfield University from 1998 to 2002 working on the thermo-chemo characterization of a novel polymer composite matrix for aerospace application (Cranfield University - EPSRC funded project) and he received an AUDI Foundation grant (2001) as a young researcher for the development of new holder jig to measure mechanical modulus during the polymerization reaction of the modified thermosetting matrix system. He has extensively worked on cure-induced stress deformation during the manufacturing of composites and physical-chemical changes due to the polymerization of thermosetting resin. From 2002 to 2004 as Responsible for the Thermal Analysis and Mechanical activities of the Italian Aerospace Research Centre (CIRA) in Italy, he was involved in several EU and national projects within the area of composites characterization and design. He is currently a Permanent Researcher at the Institute of Polymers, Composites and Biomaterials (IPCB) at the National Research Council (CNR) of Italy. He is currently a contract professor for the University of Campania at the Dept. of Industrial and Information Engineering holding the course “Experimental Technique for Aerospace Structures” for the Aerospace Engineering faculty since 2015. His main research interests include the development of advanced composites, mechanical characterization of material and structures, nano-reinforcement of thermosetting resin for composites application, cure-dependent property, cure-induced stresses in composite, viscoelasticity, and (as Responsible for an ongoing national project) resistance to fire of micro and nanoloaded thermosets. His has published more than 100 scientific peer-reviewed papers in international journals, more than 80 contributions to international and national conferences and 6 book contributions.

• Development of Advanced Composites
• Mechanical Characterization of Material and Structures
• Nano-reinforcement of Thermosetting Resin for Composites Application
• Cure-dependent Property
• Cure-induced Stresses in Composite
• Viscoelasticity and (as Responsible for an ongoing national project) resistance to fire of micro and nanoloaded thermosets

• Balato, M., Petrarca, C., Quercia, A., Riccio, A., Sellitto, A., Campi, J., Borriello, A., Zarrelli, M., Balato, G. A customized knee antibiotic-loaded pmma spacer: A pre-liminary design analysis (2021) 13 (23), art. no. 4065. DOI: 10.3390/polym13234065
• Elmahdy, A., Zotti, A., Zuppolini, S., Zarrelli, M., Borriello, A., Verleysen, P.Effect of strain rate and silica filler content on the compressive behavior of rtm6 epoxy-based nanocomposites(2021) 13 (21), art. no. 3735. DOI: 10.3390/polym13213735
• Balato, M., Petrarca, C., de Matteo, V., Lenzi, M., Festa, E., Sellitto, A., Campi, J., Zarrelli, M., Balato, G.On the necessity of a customized knee spacer in peri-prosthetic joint infection treatment: 3d numerical simulation results (2021) 11 (10), art. no. 1039. DOI: 10.3390 jpm11101039
• Dzhardimalieva, G., Aydemir, T., Prokofiev, M., Golubeva, N., Yumashev, O., Bubnova, M., Zarrelli, M., Uflyand, I., Kydralieva, K.FeCo@N-Doped Nanoparticles Encapsulated in Polyacrylamide-Derived Carbon Nanocages as a Functional Filler for Polyethylene System (2021) 6 (33), pp. 8546-8559. DOI: 10.1002/slct.202101624
• Riccio, A., Napolitano, C., Sellitto, A., Acanfora, V., Zarrelli, M.Development of a combined micro-macro mechanics analytical approach to design shape memory alloy spring-based actuators and its experimental validation(2021) 21 (16), art. no. 5506. DOI: 10.3390/s21165506
• Riccio, A., Saputo, S., Zarrelli, M., Sellitto, A., Napolitano, C., Acanfora, V.Shape memory alloy-based actuator: Experimental and modelling(2021) art. no. 9511770, pp. 665-671. DOI: 10.1109/MetroAeroSpace51421.2021.9511770
• Riccio, A., Russo, A., Sellitto, A., Acanfora, V., Alfano, D., Zarrelli, M., Toscano, C. Experimental investigation on the delamination onset and propagation in composite specimens subjected to compressive loads by using Digital Image Correlation(2021) art. no. 9511718, pp. 659-664. DOI: 10.1109/MetroAeroSpace51421.2021.9511718
• Patti, A., Nele, L., Zarrelli, M., Graziosi, L., Acierno, D.A Comparative Analysis on the Processing Aspects of Basalt and Glass Fibers Reinforced Composites(2021) 22 (5), pp. 1449-1459. DOI: 10.1007/s12221-021-0184-x
• Glaskova‐kuzmina, T., Zotti, A., Borriello, A., Zarrelli, M., Aniskevich, A.Basalt fibre composite with carbon nanomodified epoxy matrix under hydrothermal ageing(2021) 13 (4), art. no. 532, pp. 1-14. DOI: 10.3390/polym13040532
• Dilonardo, E., Nacucchi, M., De Pascalis, F., Zarrelli, M., Giannini, C.Inspection of Carbon Fibre Reinforced Polymers: 3D identification and quantification of components by X-ray CT(2021). DOI: 10.1007/s10443-021-09976-x
• Bogdanova, L., Lesnichaya, V., Spirin, M., Shershnev, V., Irzhak, V., Kydralieva, K., Zarrelli, M., Dzhardimalieva, G.Mechanical properties of polycondensate epoxy nanocomposites filled with Ag nanoparticles synthesized in situ(2021) 34, pp. 156-159. DOI: 10.1016/j.matpr.2020.02.138
• Shershnev, V., Kudryavtsev, P., Knerelman, E., Davydova, G., Zarrelli, M., Dzhardimalieva, G.Core-shell nanocomposites produced from metal dicarboxylates(2021) 34, pp. 235-238. DOI: 10.1016/j.matpr.2020.03.042
• Shershneva, I., Shershnev, V., Kydralieva, K., Rabinskiy, L., Zarrelli, M., Dzhardimalieva, G.Effect of gamma irradiation on industrial-grade nitrile butadiene rubber(2021) 34, pp. 293-296. DOI: 10.1016/j.matpr.2020.03.701
• Zotti, A., Zuppolini, S., Borriello, A., Zarrelli, M.Thermal and mechanical characterization of an aeronautical graded epoxy resin loaded with hybrid nanoparticles(2020) 10 (7), art. no. 1388, pp. 1-14. DOI: 10.3390/nano10071388
• Dilonardo, E., Nacucchi, M., De Pascalis, F., Zarrelli, M., Giannini, C.High resolution X-ray computed tomography: A versatile non-destructive tool to characterize CFRP-based aircraft composite elements(2020) 192, art. no. 108093. DOI: 10.1016/j.compscitech.2020.108093
• Glaskova-Kuzmina, T., Aniskevich, A., Papanicolaou, G., Portan, D., Zotti, A., Borriello, A., Zarrelli, M.Hydrothermal aging of an epoxy resin filled with carbon nanofillers(2020) 12 (5), art. no. 1153. DOI: 10.3390/POLYM12051153
• Riccio, A., Russo, A., Sellitto, A., Toscano, C., Alfano, D., Zarrelli, M.Experimental and numerical assessment of fibre bridging toughening effects on the compressive behaviour of delaminated composite plates(2020) 12 (3), art. no. 554, pp. 1-20. DOI: 10.3390/polym12030554
• Zotti, A., Elmahdy, A., Zuppolini, S., Borriello, A., Verleysen, P., Zarrelli, M.Aromatic hyperbranched polyester/RTM6 epoxy resin for EXTREME dynamic loading aeronautical applications(2020) 10 (2), art. no. 188. DOI: 10.3390/nano10020188
• Glaskova-Kuzmina, T., Aniskevich, A., Zotti, A., Borriello, A., Zarrelli, M.Flexural properties of the epoxy resin filled with single and hybrid carbon nanofillers(2020) 1431 (1), art. no. 012001. DOI: 10.1088/1742-6596/1431/1/012001
• Zarrelli, M., Elmahdy, A., Zotti, A., Zuppolini, S., Borriello, A., Verleysen, P.Compressive behavior of epoxy resin filled with silica nanoparticles at high strain rate(2020) .
• Zotti, A., Zuppolini, S., Zarrelli, M., Borriello, A.Fracture toughness and mechanical characterization of epoxy nanocomposites based on different hyperbranched polymers typologies(2020) .
• Glaskova-Kuzmina, T., Aniskevich, A., Sevcenko, J., Borriello, A., Zarrelli, M.Moisture sorption by epoxy resin filled with MWCNT of different thickness(2020) .
• Sellitto, A., Iodice, V., Zampini, G., Zarrelli, M., Riccio, A., Sansone, R., Caraviello, A.Experimental investigation on the mechanical behaviour of natural fibre sandwich panels with posidonia core(2020) 827 KEM, pp. 49-54. DOI: 10.4028/www.scientific.net/KEM.827.49
• Sellitto, A., Riccio, A., Russo, A., Napolitano, C., Zarrelli, M., Meo, M.Ultrasonic damage detection of impacted long and short fibre composite specimens(2020) 827 KEM, pp. 31-36. DOI: 10.4028/www.scientific.net/KEM.827.31
• Sellitto, A., Riccio, A., Russo, A., Garofano, A., Zarrelli, M.Nanofillers’ effects on fracture energy in composite aerospace structures(2020) 827 KEM, pp. 43-48. DOI: 10.4028/www.scientific.net/KEM.827.43
• Glaskova-Kuzmina, T., Aniskevich, A., Sevcenko, J., Zotti, A., Borriello, A., Zarrelli, M.Environmental effects on mechanical, thermophysical and electrical properties of epoxy resin filled with carbon nanofillers(2019) 2196, art. no. 020004. DOI: 10.1063/1.5140277
• Barra, G., Guadagno, L., Vertuccio, L., Simonet, B., Santos, B., Zarrelli, M., Arena, M., Viscardi, M.Different methods of dispersing carbon nanotubes in epoxy resin and initial evaluation of the obtained nanocomposite as a matrix of carbon fiber reinforced laminate in terms of vibroacoustic performance and flammability(2019) 12 (18), art. no. 2998. DOI: 10.3390/ma12182998
• Zotti, A., Zuppolini, S., Borriello, A., Zarrelli, M.Survey data on thermal properties of different hyperbranched polymers (HBPs) and on morphological and thermal analysis of the corresponding epoxy matrix nanocomposites(2019) 25, art. no. 104303. DOI: 10.1016/j.dib.2019.104303
• Russo, A., Zarrelli, M., Sellitto, A., Riccio, A.Fiber bridging induced toughening effects on the delamination behavior of composite stiffened panels under bending loading: A numerical/experimental study(2019) 12 (15), art. no. 2407. DOI: 10.3390/ma12152407
• Zotti, A., Zuppolini, S., Borriello, A., Zarrelli, M.The effect of glassy and rubbery hyperbranched polymers as modifiers in epoxy aeronautical systems(2019) 169, pp. 88-95. DOI: 10.1016/j.compositesb.2019.04.006
• Bucciarelli, F., Malfense Fierro, G.P., Zarrelli, M., Meo, M.A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials(2019) 26 (3), pp. 871-896. DOI: 10.1007/s10443-018-9754-5
• Azzouz, L., Chen, Y., Zarrelli, M., Pearce, J.M., Mitchell, L., Ren, G., Grasso, M.Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins(2019) 213, pp. 220-230. DOI: 10.1016/j.compstruct.2019.01.103
• Zotti, A., Zuppolini, S., Borriello, A., Zarrelli, M.Thermal properties and fracture toughness of epoxy nanocomposites loaded with hyperbranched-polymers-based core/shell nanoparticles (2019). 9 (3). 418. DOI: 10.3390/nano9030418
• Sellitto, A., Riccio, A., Russo, A., Zarrelli, M., Toscano, C., Lopresto, V.Compressive behaviour of a damaged omega stiffened panel: Damage detection and numerical analysis(2019) 209, pp. 300-316. DOI: 10.1016/j.compstruct.2018.10.105
• Zotti, A., Zuppolini, S., Borriello, A., Zarrelli, M.ffect of SiO2@polydopamine core/shell nanoparticles as multifunctional filler for an aeronautical epoxy resin(2019) 34, pp. 117-120. DOI: 10.1016/j.matpr.2020.01.407
• Riccio, A., Saputo, S., Sellitto, A., Russo, A., Acanfora, V., Iaccarino, P., Zarrelli, M.On the mechanical behavior of laminated composite plates subjected to compression after impact tests(2019) 34, pp. 53-56. DOI: 10.1016/j.matpr.2020.01.184
• Russo, A., Sellitto, A., Zarrelli, M., Riccio, A. Numerical study on the toughening effect of the fiber bridging on delaminated composite stiffened panel(2019) 34, pp. 65-68. DOI: 10.1016/j.matpr.2020.01.188
• Vertuccio, L., Spinelli, G., Lamberti, P., Tucci, V., Zarrelli, M., Russo, S., Iannuzzo, G., Guadagno, L.Self-sensing nanocomposites in automotive/aeronautic field(2019) 34, pp. 125-127. DOI: 10.1016/j.matpr.2020.01.409
• Zuppolini, S., Zotti, A., Borriello, A., Zarrelli, M.The effect of an aromatic hyperbranched polyester in aeronautical epoxy composites (2019) 34, pp. 21-23. DOI: 10.1016/j.matpr.2019.12.074
• Glaskova-Kuzmina, T., Aniskevich, A., Sevcenko, J., Borriello, A., Zarrelli, M.Cyclic moisture sorption and its effects on the thermomechanical properties of epoxy and epoxy/MWCNT nanocomposite(2019) 11 (9), art. no. 1383. DOI: 10.3390/polym11091383
• Zotti, A., Zuppolini, S., Tábi, T., Grasso, M., Ren, G., Borriello, A., Zarrelli, M.Effects of 1D and 2D nanofillers in basalt/poly(lactic acid) composites for additive manufacturing(2018) 153, pp. 364-375. DOI: 10.1016/j.compositesb.2018.08.128
• Grasso, M., Azzouz, L., Ruiz-Hincapie, P., Zarrelli, M., Ren, G.Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens(2018) 24 (8), pp. 1337-1346. DOI: 10.1108/RPJ-04-2017-0055
• Vertuccio, L., Guadagno, L., Spinelli, G., Lamberti, P., Zarrelli, M., Russo, S., Iannuzzo, G.Smart coatings of epoxy based CNTs designed to meet practical expectations in aeronautics(2018) 147, pp. 42-46. DOI: 10.1016/j.compositesb.2018.04.027
• Esposito, F., Zotti, A., Palumbo, G., Zuppolini, S., Consales, M., Cutolo, A., Borriello, A., Campopiano, S., Zarrelli, M., Iadicicco, A.Liquefied petroleum gas monitoring system based on polystyrene coated long period grating (2018) 18 (5), art. no. 1435. DOI: 10.3390/s18051435
• Esposito, F., Zotti, A., Ranjan, R., Zuppolini, S., Borriello, A., Campopiano, S., Zarrelli, M., Iadicicco, A.Single-Ended Long Period Fiber Grating Coated with Polystyrene Thin Film for Butane Gas Sensing(2018) 36 (3), art. no. 8118085, pp. 825-832. DOI: 10.1109/JLT.2017.2776599
• Riccio, A., Sellitto, A., Saputo, S., Conte, G., Zarrelli, M.Thermo-mechanical behaviour of a composite stiffened panel undergoing the tail-pipe fire event(2018) 774 KEM, pp. 101-106. DOI: 10.4028/www.scientific.net/KEM.774.101
• Saputo, S., Russo, A., Raimondo, A., Iodice, B., Zarrelli, M.Fire condition effects on the mechanical behaviour of composite structures (2018) 923 MSF, pp. 13-16. DOI: 10.4028/www.scientific.net/MSF.923.13
• Riccio, A., Sellitto, A., Saputo, S., Russo, A., Zarrelli, M., Lopresto, V.Modelling the damage evolution in notched omega stiffened composite panels under compression(2017) 126, pp. 60-71. DOI: 10.1016/j.compositesb.2017.05.067
• Ricciardi, M.R., Martone, A., Borriello, A., Zarrelli, M., Giordano, M., Langella, A., Antonucci, V.Mechanical behavior of hybrid fiber-reinforced composites manufactured by pulse infusion(2017) 38 (10), pp. 2254-2260. DOI: 10.1002/pc.23806
• Dello Iacono, S., Martone, A., Pastore, A., Filippone, G., Acierno, D., Zarrelli, M., Giordano, M., Amendola, E. Thermally activated multiple self-healing diels-alder epoxy system(2017) 57 (7), pp. 674-679. DOI: 10.1002/pen.24570
• KranauskaitÄ—, I., Macutkevič, J., Borisova, A., Martone, A., Zarrelli, M., Selskis, A., Aniskevich, A., Banys, J. Enhancing electrical conductivity of multiwalled carbon nanotube/epoxy composites by graphene nanoplatelets [EpoksidinÄ—s dervos kompozitų su daugiasieniais anglies nanovamzdeliais elektrinio laidumo gerinimas grafeno dalelÄ—mis](2017) 57 (4), pp. 232-242. DOI: 10.3952/physics.v57i4.3602
• D'Agostino, T., Meo, M., Zarrelli, M.Bio-robotic ROV design for pipe-work opto-sensorial safety-inspections (2017) 1, pp. 334-342. DOI: 10.12783/shm2017/13884
• Riccio, A., Cristiano, R., Mezzacapo, G., Zarrelli, M., Toscano, C.Experimental Investigation of Delamination Growth in Composite Laminates under a Compressive Load(2017) 2017, art. no. 3431093. DOI: 10.1155/2017/3431093
• Tábi, T., Zarrelli, M.Development of poly(Lactic acid) filled with basalt fibres and talc for engineering applications (2017) 885, pp. 303-308. DOI: 10.4028/www.scientific.net/MSF.885.303
• Glaskova-Kuzmina, T., Aniskevich, A., Martone, A., Giordano, M., Zarrelli, M.Effect of moisture on elastic and viscoelastic properties of epoxy and epoxy-base carbon fibre reinforced plastic filled with multiwall carbon nanotubes(2016) 90, pp. 522-527. DOI: 10.1016/j.compositesa.2016.08.026
• Martone, A., Antonucci, V., Zarrelli, M., Giordano, M.A simplified approach to model damping behaviour of interleaved carbon fibre laminates(2016) 97, pp. 103-110. DOI: 10.1016/j.compositesb.2016.04.048
• Dello Iacono, S., Martone, A., Filippone, G., Acierno, D., Zarrelli, M., Giordano, M., Amendola, E.Insight on mendable resin made by combining Diels-Alder epoxy adducts with DGEBA(2016) 1736, art. no. 4949650. DOI: 10.1063/1.4949650
• Martone, A., Dello Iacono, S., Zarrelli, M., Giordano, M., Amendola, E.Interlaminar fracture of composites made by thermo-reversible epoxy(2016) .
• Riccio, A., Sellitto, A., Saputo, S., Russo, A., Antonucci, V., Ricciardi, M.R., Zarrelli, M., Lopresto, V.Large Notch Damage Evolution in Omega Stiffened Composite Panels(2016) 167, pp. 151-159. DOI: 10.1016/j.proeng.2016.11.682
• Riccio, A., Raimondo, A., Sellitto, A., Acanfora, V., Zarrelli, M.Multifunctional Polypropylene Core for Aerospace Sandwich Composite Panels(2016) 167, pp. 64-70. DOI: 10.1016/j.proeng.2016.11.670
• Riccio, A., Di Caprio, F., Scaramuzzino, F., Sellitto, A., Zarrelli, M.Stiffened panels damage tolerance determination using an optimization procedure based on a linear delamination growth approach (2016) 9 (4), pp. 1301-1317. DOI: 10.3844/ajeassp.2016.1301.1317
• Esposito, M., Martone, A., Antonucci, V., Zarrelli, M., Giordano, M. Strain monitoring by fiber bragg gratings in thick composite cylinders manufacturing (2016) 4, pp. 2989-2998.
• Zotti, A., Borriello, A., Zuppolini, S., Antonucci, V., Giordano, M., Pomogailo, A.D., Lesnichaya, V.A., Golubeva, N.D., Bychkov, A.N., Dzhardimalieva, G.I., Zarrelli, M.Fabrication and characterization of metal-core carbon-shell nanoparticles filling an aeronautical composite matrix(2015) 71, pp. 140-151. DOI: 10.1016/j.eurpolymj.2015.07.052
• Zotti, A., Zuppolini, S., Giordano, M., Zarrelli, M., Borriello, A., De Luca, G.Optical aliphatic hydrocarbon gas sensor based on Titanium Dioxide thin film(2015) art. no. 7066832. DOI: 10.1109/AISEM.2015.7066832
• Antonucci, V., Zarrelli, M.Vacuum Infusion Manufacturing of CFRP Panels with Induced Delamination (2015) pp. 249-261. DOI: 10.1007/978-3-319-04004-2_12
• Martone, A., Petriccione, A., Zarrelli, M., Giordano, M., Borisova, A., Aniskevich, A., Armentano, I., Torre, L.Multifunctional properties of nanocomposites made by 1D and 2D graphene based fillers (2015) art. no. 7388992, pp. 330-333. DOI: 10.1109/NANO.2015.7388992
• Zotti, A., Borriello, A., Ricciardi, M., Antonucci, V., Giordano, M., Zarrelli, M.Effects of sepiolite clay on degradation and fire behaviour of a bisphenol A-based epoxy(2015) 73, pp. 139-148. DOI: 10.1016/j.compositesb.2014.12.019
• Glaskova-Kuzmina, T., Aniskevich, A., Zarrelli, M., Martone, A., Giordano, M.Effect of filler on the creep characteristics of epoxy and epoxy-based CFRPs containing multi-walled carbon nanotubes(2014) 100, pp. 198-203. DOI: 10.1016/j.compscitech.2014.06.011
• Zotti, A., Borriello, A., Martone, A., Antonucci, V., Giordano, M., Zarrelli, M.Effect of sepiolite filler on mechanical behaviour of a bisphenol A-based epoxy system(2014) 67, pp. 400-409. DOI: 10.1016/j.compositesb.2014.07.017
• Antonucci, V., Ricciardi, M.R., Caputo, F., Langella, A., Lopresto, V., Riccio, A., Zarrelli, M.Low velocity impact response of carbon fibre laminates made by pulsed infusion(2014) 88, pp. 230-234. DOI: 10.1016/j.proeng.2014.11.149
• Riccio, A., Damiano, M., Zarrelli, M., Giordano, M., Scaramuzzino, F.Simulating the response of composite plates to fire(2014) 21 (3), pp. 511-524. DOI: 10.1007/s10443-013-9357-0
• Riccio, A., Di Felice, G., Lamanna, G., Antonucci, E., Caputo, F., Lopresto, V., Zarrelli, M.A global-local numerical model for the prediction of impact induced damage in composite laminates(2014) 21 (3), pp. 457-466. DOI: 10.1007/s10443-013-9343-6
• Petriccione, A., Zarrelli, M., Antonucci, V., Giordano, M.Aggregates of chemically functionalized multiwalled carbon nanotubes as viscosity reducers(2014) 7 (4), pp. 3251-3261. DOI: 10.3390/ma7043251
• Riccio, A., Damiano, M., Zarrelli, M., Scaramuzzino, F.Three-dimensional modeling of composites fire behavior2014) 33 (7), pp. 619-629. DOI: 10.1177/0731684413512226
• Giordano, M., Russo, M., Zarrelli, M., Cusano, A., Antonucci, V.Probing the the glass transition of atactic polystyrene thin films using fiber optic refractometry(2014) 338 (1), pp. 90-95. DOI: 10.1002/masy.201300148
• Antonucci, V., Esposito, M., Ricciardi, M.R., Giordano, M., Zarrelli, M.Strain monitoring of composite elements by fibre Bragg grating sensors during a quasi-static indentation(2014) 56, pp. 34-41. DOI: 10.1016/j.compositesb.2013.07.020
• Di Fabio, G., Romanucci, V., Zarrelli, M., Giordano, M., Zarrelli, A.C-4 gem-dimethylated oleanes of gymnema sylvestre and their pharmacological activities(2013) 18 (12), pp. 14892-14919. DOI: 10.3390/molecules181214892
• Riccio, A., Zarrelli, M., Caputo, F.Damage propagation in composite structures using an embedded global-local approach(2013) 9 (1), pp. 21-41.
• Lavorgna, M., Romeo, V., Martone, A., Zarrelli, M., Giordano, M., Buonocore, G.G., Qu, M.Z., Fei, G.X., Xia, H.S. Silanization and silica enrichment of multiwalled carbon nanotubes: Synergistic effects on the thermal-mechanical properties of epoxy nanocomposites(2013) 49 (2), pp. 428-438. DOI: 10.1016/j.eurpolymj.2012.10.003
• Martone, A., Zarrelli, M., Giordano, M., López-Higuera, J.M.Structural health monitoring in buildings, bridges and civil engineering(2013) pp. 21-45. DOI: 10.1142/9789814412971_0002
• Esposito, M., Buontempo, S., Petriccione, A., Zarrelli, M., Breglio, G., Saccomanno, A., Szillasi, Z., Makovec, A., Cusano, A., Chiuchiolo, A., Bajko, M., Giordano, M.Fiber Bragg Grating sensors to measure the coefficient of thermal expansion of polymers at cryogenic temperatures(2013) 189, pp. 195-203. DOI: 10.1016/j.sna.2012.09.016
• Ricciardi, M.R., Antonucci, V., Giordano, M., Zarrelli, M.Thermal decomposition and fire behavior of glass fiber-reinforced polyester resin composites containing phosphate-based fire-retardant additives(2012) 30 (4), pp. 318-330. DOI: 10.1177/0734904112439293
• Martone, A., Formicola, C., Piscitelli, F., Lavorgna, M., Zarrelli, M., Antonucci, V., Giordano, M.Thermo-mechanical characterization of epoxy nanocomposites with different carbon nanotube distributions obtained by solvent aided and direct mixing(2012) 6 (7), pp. 520-531. DOI: 10.3144/expresspolymlett.2012.56
• Ricciardi, M.R., Antonucci, V., Zarrelli, M., Giordano, M.Fire behavior and smoke emission of phosphate-based inorganic fire-retarded polyester resin(2012) 36 (3), pp. 203-215. DOI: 10.1002/fam.1101
• Glaskova, T., Zarrelli, M., Aniskevich, A., Giordano, M., Trinkler, L., Berzina, B.Quantitative optical analysis of filler dispersion degree in MWCNT-epoxy nanocomposite(2012) 72 (4), pp. 477-481. DOI: 10.1016/j.compscitech.2011.11.029
• Petriccione, A., Annicchiarico, D., Antonucci, V., Giordano, M., Riccio, A., Scaramuzzino, F., Zarrelli, M.A stiffness volume averaging based approach to model non-crimp fabric reinforced composites(2012) 72 (2), pp. 360-369. DOI: 10.1016/j.compscitech.2011.11.026
• Riccio, A., Caputo, F., Antonucci, E., Lopresto, V., Zarrelli, M.A global-local approach to describe the damage propagation in composite laminated structures(2012) .
• Zarrelli, M., D'urso, F., Pullara, A., Codda, M., Amendola, E., Borriello, A.Fireproof silicone sealants for shipbuilding(2012) .
• Martone, A., Grassia, L., Zarrelli, M., Giordano, M., D'Amore, A.Enthalpy relaxation of an epoxy matrix/carbon nanotubes(2012) 1459 (1), pp. 347-349. DOI: 10.1063/1.4738492
• Antonucci, V., Esposito, M., Ricciardi, M.R., Raffone, M., Zarrelli, M., Giordano, M.Permeability characterization of stitched carbon fiber preforms by fiber optic sensors(2011) 5 (12), pp. 1075-1084. DOI: 10.3144/expresspolymlett.2011.105
• Martone, A., Giordano, M., Antonucci, V., Zarrelli, M.Enhancing damping features of advanced polymer composites by micromechanical hybridization(2011) 42 (11), pp. 1663-1672. DOI: 10.1016/j.compositesa.2011.07.019
• Glaskova, T., Zarrelli, M., Borisova, A., Timchenko, K., Aniskevich, A., Giordano, M.Method of quantitative analysis of filler dispersion in composite systems with spherical inclusions(2011) 71 (13), pp. 1543-1549. DOI: 10.1016/j.compscitech.2011.06.009
• Martone, A., Faiella, G., Antonucci, V., Giordano, M., Zarrelli, M.The effect of the aspect ratio of carbon nanotubes on their effective reinforcement modulus in an epoxy matrix (2011) 71 (8), pp. 1117-1123. DOI: 10.1016/j.compscitech.2011.04.002
• Formicola, C., De Fenzo, A., Zarrelli, M., Giordano, M., Antonucci, V.Zinc-based compounds as smoke suppressant agents for an aerospace epoxy matrix(2011) 60 (2), pp. 304-311. DOI: 10.1002/pi.2949
• Meola, C., Carlomagno, G.M., Annicchiarico, D., Giordano, M., Zarrelli, M.Detection of delamination in DOI: 10.1243/09544100JAERO743
• De Fenzo, A., Formicola, C., Antonucci, V., Zarrelli, M., Giordano, M.Effects of zinc-based compound on degradation behaviour and smoke production of epoxy matrix(2010) pp. 117-159.
• Zarrelli, M., Skordos, A.A., Partridge, I.K.Toward a constitutive model for cure-dependent modulus of a high temperature epoxy during the cure (2010) 46 (8), pp. 1705-1712. DOI: 10.1016/j.eurpolymj.2010.06.002
• Faiella, G., Zarrelli, M., Antonucci, V., Giordano, M.Tuning by process of the electrical percolation behavior of multiwalled carbon nanotubes/epoxy composites(2010) 1255, pp. 411-413. DOI: 10.1063/1.3455654
• Riccio, A., Giordano, M., Zarrelli, M.A linear numerical approach to simulate the delamination growth initiation in stiffened composite panels (2010) 44 (15), pp. 1841-1866. DOI: 10.1177/0021998310364108
• Martone, A., Formicola, C., Giordano, M., Zarrelli, M.Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composites(2010) 70 (7), pp. 1154-1160. DOI: 10.1016/j.compscitech.2010.03.001
• Formicola, C., de Fenzo, A., Zarrelli, M., Frache, A., Giordano, M., Camino, G.Synergistic effects of zinc borate and aluminium trihydroxide on flammability behaviour of aerospace epoxy system(2009) 3 (6), pp. 376-384. DOI: 10.3144/expresspolymlett.2009.47
• De Fenzo, A., Formicola, C., Antonucci, V., Zarrelli, M., Giordano, M.Effects of zinc-based flame retardants on the degradation behaviour of an aerospace epoxy matrix(2009) 94 (9), pp. 1354-1363. DOI: 10.1016/j.polymdegradstab.2009.05.020
• Giordano, M., Nasser, J.S., Zarrelli, M., Cusano, A., Cutolo, A.Fiber optic sensors in structural health monitoring (2009) pp. 378-402. DOI: 10.1142/9789812834133_0017
• De Fenzo, A., Formicola, C., Zarrelli, M., Frache, A., Giordano, M., Camino, G.Synergistic effects of zinc borate and aluminum trihydrate on flammability behaviour of aerospace epoxy system(2009).
• Martone, A., Zarrelli, M., Antonucci, V., Giordano, M.Manufacturing and testing of an hybrid composite integrating viscoelastic fibers(2009).
• Formicola, C., Martone, A., Zarrelli, M., Giordano, M.Reinforcement effect of multi-walled carbon nanotube in sonicated monocomponent epoxy matrix(2009).
• Zarrelli, M., Skordos, A.A., Partridge, I.K.Thermomechanical analysis of a toughened thermosetting system (2008) 44 (2), pp. 181-190. DOI: 10.1007/s11029-008-9009-x
• Riccio, A., Zarrelli, M., Tessitore, N.A numerical model for delamination growth simulation in non-crimp fabric composites (2007) 67 (15-16), pp. 3345-3359. DOI: 10.1016/j.compscitech.2007.03.029
• D'Amore, A., Caputo, F., Grassia, L., Zarrelli, M.Numerical evaluation of structural relaxation-induced stresses in amorphous polymers (2006) 37 (4), pp. 556-564. DOI: 10.1016/j.compositesa.2005.05.011
• Zarrelli, M., Partridge, I.K., D'Amore, A.Warpage induced in bi-material specimens: Coefficient of thermal expansion, chemical shrinkage and viscoelastic modulus evolution during cure(2006) 37 (4), pp. 565-570. DOI: 10.1016/j.compositesa.2005.05.012
• Zarrelli, M., Skordos, A.A., Partridge, I.K.Investigation of cure induced shrinkage in unreinforced epoxy resin (2002) 31 (9), pp. 377-384. DOI: 10.1179/146580102225006350

No content available to display!!!

• https://orcid.org/0000-0002-5018-5512
• https://www.scopus.com/authid/detail.uri?authorId=22735830600
• https://sciprofiles.com/profile/69139
• https://loop.frontiersin.org/people/1704689
• https://www.webofscience.com/wos/author/record/H-7739-2013