Recently Published Articles

Filter Applied:
Article image

Research Article | Open Access

Published on: 14 Nov 2026

Article ID: wjche.2026.k1401

Comparative Evaluation of Response Surface Methodology (RSM) and Artificial Neural Networks (ANN) for Alumina Extraction from Calcined Owhe Kaolinite Using HNO3 / H2 O2 Leaching
Mabel Keke* 1 Ikechukwu A. Nnanwube 2 Okechukwu D. Onukwuli 3 Samson O. Okpo 1

Alumina (Al2 O3 ) is an important industrial material used in ceramics, refractories, catalysts, and high-purity applications. This study investigated alumina extraction from calcined Owhe kaolinite, Delta State, Nigeria, using HNO3 /H2 O2 leaching and compared Response Surface Methodology (RSM), Artificial Neural Network (ANN), and Gaussian Process Regression (GPR) for process modelling and prediction. Five operating variables leaching temperature, HNO3 concentration, stirring rate,…

QR Code image
Article image

Research Article | Open Access

Published on: 21 Oct 2026

Article ID: wjche.2026.j2104

Synthesis of Ethyl Esters from Waste Cooking Oil Using a Calcined Coconut Husk-Based Catalyst: A Novel Green Approach
Daniel UI 1 Wisdom CU* 2 Emmanuel TE 3 Emmanuel D 1 Cyril OA 2 David RI 2

A low-cost heterogeneous base catalyst was prepared by simple calcination of coconut husk at 700°C and applied to the ethanolysis of Waste Cooking Oil (WCO). The catalyst was characterised by FTIR, XRD, SEM and nitrogen physisorption, revealing a silica-rich matrix containing crystalline quartz, potassium chloride and residual graphitic carbon together with a BET surface area of 181.9 m2 g-1 and a modal pore diameter of 3.0 nm. Response-surface methodology with a central-composite design was…

QR Code image
Article image

Research Article | Open Access

Published on: 13 Apr 2026

Article ID: wjche.2026.d1301

Production of Starch-Based Bioplastic from the Mixture of Potato and Cassava Peel Wastes Starch Using Glycerol as Plasticizers: A Comparison on the Effect of CaCO3 and HCl as Fillers
Nasir A. S* 1 Mahmud A 2 Aliyu A 1

This study investigates the production of starch-based bioplastics from the mixture of potato and cassava peel waste starch using glycerol as plasticizer (20% wt/v) and comparing reinforcement with calcium carbonate and hydrochloric acid (4% wt/wt of filler to starch). The potato and cassava peel starch used in the production of the bioplastics were at a ratio of 3:1, 1 1, and 1:3 (wt/wt)), whereas the pure starches of the potato and cassava peel were studied as control. The physical…

QR Code image